Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
1000 was considered a half ton
1500 and 2500 were 3/4 tons. Should be an Eaton H052 or H055 I think. I don't have a 62 manual. |
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
!500's to 66 were 3/4 to so it would be a Dana 60. 2500's to 66 were 1 ton and those would have the Eaton rear Diff:ok:
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
Quote:
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
It may have been a heavy duty option, I've seen them with 60's as well.
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
Quote:
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
Quote:
Model 1000. Standard SM318 trans. Standard Axle H035. Ratios 3.07 and 3.92 available. Optional trans 177 CA HYD. or SM420. Model 1500. Standard Trans SM318. Standard Axle H052 Ratios 4.56 and 4.10 available. Optional Trans 300GH HYD and Sma420. Model P1500. Standard Trans SM318. Standard Axle H055. Ratio 4.56 Optional trans. 210U HYD Model 2500. Standard Trans SM420. Standard Axle H072. Ratio 5.14 Optional Trans 300GH HYD. That's what the 60-61 manual says anyhow. |
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
It's also saying Model 1000 with HO35 rearend? That's odd because it's pretty much common knowledge all 1/2 ton 1000 series pickups came with the Dana 44. I guess we will only know if someone out there with a 60-61 GMC 1/2 or 3/4 ton pickup has a Corporate GM rear rather than a Dana 44 or 60:banghead:
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
Quote:
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
Then it's most likely not correct! Figure 60-66 1000 series Dana 44 and 60-66 1500 series Dana 60:ok:
|
Re: GMC 1962 - 3/4 t - Long bed - 305ci - 4 speed
1 Attachment(s)
Welcome from South Dakota! Even though this is from a 10 year newer GMC, a Dana 60 still looked like this I believe, except cleaner and less rusty! I also "dig" your whole truck---LOL! The experts here may correct me, but did you know that the grill GMC logo appears to be 1966?
DAC |
All times are GMT +1. The time now is 02:08 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.