Re: It's at the Machine Shop
Great to hear, I just finished my 305 and have somethings left from my rebuild.
Machined crank and set of .020/.020 main and rod bearings. Found out my engine was a 1974 305 and took a different main bearing (bigger), so the main bearings are for 60-73 motors. Good luck with the rebuild. Dont forget to replace the oil pump, I found out there are two different ones too based on the size of the oil mounting bolt. They are NOT interchangeable. |
Re: It's at the Machine Shop
Quote:
I definitely have the oil pump on my list since that was the one thing I was worried about before. Thanks for the heads up, I will get the specs off the original to verify. |
All times are GMT +1. The time now is 02:05 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.