6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   GMC V6 and V12 Engines (https://6066gmcclub.com/forumdisplay.php?f=9)
-   -   Hi torque starter (https://6066gmcclub.com/showthread.php?t=49988)

HOTRODJOHN May 6th, 2017 02:54 AM

Hi torque starter
 
Is there a Hi Torque Starter available for a 305 E motor. Thanks, John

TJ's GMC May 6th, 2017 03:10 AM

Re: Hi torque starter
 
I had mine rebuilt and it cranks my 305e over no problem....and I am due for a new battery. haha Any particular reason you'd prefer a high torque over a standard? Far as I know only a standard is available....others may know about something though.

bigblockv6 May 6th, 2017 04:56 AM

Re: Hi torque starter
 
Quote:

Originally Posted by HOTRODJOHN (Post 66968)
Is there a Hi Torque Starter available for a 305 E motor. Thanks, John

The only high torque starter for the GMC V6 is through Bendtsens but you have to use their automatic transmission adapter assembly to make it work since it's part of the conversion. Otherwise a good rebuilt 305E starter is just fine. I'm the 305E using one on my 478 because the larger starter compatible for this engine required a considerably larger battery for big truck applications. It really surprised me when I put my 305E starter how well it turned over that big 478:thumbsup:

HOTRODJOHN May 6th, 2017 05:24 PM

Re: Hi torque starter
 
Thanks guys for the quick response. Will just use the stock one after the rebuild. John

sclor May 8th, 2017 02:42 PM

Re: Hi torque starter
 
HotRod:
You could easily build one. If you look at the picture below, this is a high torque Delco starter from a Cadillac. Big block Chevies, Olds, Pontiacs used them too. The reason you can tell from the outside is that it uses the spacer where the starter terminal bolts to the solenoid. Low torque bolts up directly to the solenoid without the spacer.

If you procure one of these, the high torque field coil housing (round part) and armature are what are different. You could slip your nose cone and starter drive onto the high torque parts and you would have a high torque starter that bolts to your engine. If you have a shop rebuilding your starter, they likely have these parts already.

Hope that helps. These thoughts are from my days in the 80's working in a starter rebuild shop when I was in college.
Regards,
Steve

http://i.ebayimg.com/images/g/zhcAAO...Cq/s-l1600.jpg

HOTRODJOHN May 9th, 2017 01:48 AM

Re: Hi torque starter
 
Thanks for the info. Everyone said it is not needed so I will take that route and if there is a problem I will then change it. John


All times are GMT +1. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.