6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Exterior, Bodywork, Paint and Glass (https://6066gmcclub.com/forumdisplay.php?f=14)
-   -   Help with a custom cab (https://6066gmcclub.com/showthread.php?t=49806)

Ruger3screw December 27th, 2016 03:50 PM

Help with a custom cab
 
Hello, my body shop filled in the holes for my Custom badge and I could use some help with the placement
Thanks

Ruger3screw December 28th, 2016 06:55 PM

Re: Help with a custom cab
 
1 Attachment(s)
I found a few pictures but hate to guess on the placement.

Ruger3screw December 28th, 2016 06:59 PM

Re: Help with a custom cab
 
1 Attachment(s)
Just waiting on the bed to get back from the body shop

WDShaffer December 28th, 2016 10:33 PM

Re: Help with a custom cab
 
Did they fill them with body mud? Or did they weld the holes up?

Ruger3screw December 28th, 2016 10:42 PM

Re: Help with a custom cab
 
He welded them

WDShaffer December 28th, 2016 11:11 PM

Re: Help with a custom cab
 
Well...that is the good news, at least. Check out the thread "calling all two tones" or posts from "Lineman", who is researching similar issues, and might have measurements (I would "eyeball it based on photos, but I'm "some kind of special").

Ruger3screw December 28th, 2016 11:17 PM

Re: Help with a custom cab
 
Ya I have a few picture just thought someone had one and could pull a measurement

Sonic65 December 29th, 2016 05:01 PM

Re: Help with a custom cab
 
Quote:

Originally Posted by Ruger3screw (Post 65647)
Ya I have a few picture just thought someone had one and could pull a measurement

I can go out to my shop and measure the hole placements on my cab. I took the emblems off a while back so the holes are already exposed. Give me a day or two.

John

Ruger3screw December 29th, 2016 05:27 PM

Re: Help with a custom cab
 
Thank you

Sonic65 December 31st, 2016 11:50 PM

Re: Help with a custom cab
 
5 Attachment(s)
Quote:

Originally Posted by Ruger3screw (Post 65667)
Thank you

The pictures should be good for you. I noticed the right hole is a bit lower than the left.

If you have any questions or need additional photos let me know.

I kept the angle of the camera as directly in front of the measuring tape as possible.

John


All times are GMT +1. The time now is 10:14 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.