6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Transmissions and Rear Ends (https://6066gmcclub.com/forumdisplay.php?f=10)
-   -   Where can I find a 4 Speed Transmission Boot? (https://6066gmcclub.com/showthread.php?t=49759)

Lineman November 29th, 2016 06:25 PM

Where can I find a 4 Speed Transmission Boot?
 
Quote:

Originally Posted by 1960HDGMC (Post 58143)
Here are all the paint regulations that I have. They show the 1960,1962 and 1966 Two-Tone GMC paint schemes. If anyone has other years, or the second page for 1966,please post them here. Thanks, GM

So what would a 1963 step side custom cab look like? Where would the paint lines break?

Mine is about ready for paint.

Oh, where can I get the shifter boot?

Thanks Jay

WDShaffer November 30th, 2016 10:49 PM

Re: Calling All Two-Tones
 
From other posts, I suspect the white would be between the brightwoork, around the cab only. Conversely, my non-custom '61 has white on roof only.

gmccollector December 1st, 2016 12:28 AM

Re: Calling All Two-Tones
 
Quote:

Originally Posted by Lineman (Post 64981)
So what would a 1963 step side custom cab look like? Where would the paint lines break?

Mine is about ready for paint.

Oh, where can I get the sifter boot?

Thanks Jay

Yes , as stated the white would be inside the moldings on the side door window and just the little section of the cab. No white on the roof. What are you needing a shifter boot for ? Is it two or 4 wheel drive ? If its just the 4 speed there was no shift "boot" used , just a thick sponge like seal under the floor and on top of the transmission. If 4x4 it will have a boot only on the lever for the transfer case.

Lineman December 1st, 2016 02:50 PM

Re: Calling All Two-Tones
 
Quote:

Originally Posted by gmccollector (Post 65022)
Yes , as stated the white would be inside the moldings on the side door window and just the little section of the cab. No white on the roof. What are you needing a shifter boot for ? Is it two or 4 wheel drive ? If its just the 4 speed there was no shift "boot" used , just a thick sponge like seal under the floor and on top of the transmission. If 4x4 it will have a boot only on the lever for the transfer case.

Thanks, I think I remember that was what it was looking like. Although I think mine is all but gone now. Can you get them? What can I do to make mine nice again as this truck goes back together?

Thanks, Jay

gmccollector December 1st, 2016 03:05 PM

Re: Calling All Two-Tones
 
Heres what it looks like NOS . Not sure if they are making it yet aftermarket.

http://i270.photobucket.com/albums/j...trucks/016.jpg
http://i270.photobucket.com/albums/j...trucks/015.jpg
http://i270.photobucket.com/albums/j...trucks/014.jpg
http://i270.photobucket.com/albums/j...trucks/013.jpg

Lineman December 1st, 2016 11:17 PM

Re: Calling All Two-Tones
 
Thanks for the picks, looks like that thing is getting hard to find and the repro thing is not quite the same. You wouldn't want to sell that would you?

Thanks, Jay

gmccollector December 1st, 2016 11:45 PM

Re: Calling All Two-Tones
 
Hi Jay , sorry , I need more of them myself ! LOL .Too many trucks. The one they reproduce that AZKen posted , I have a feeling its part # 3766203 and its shorter , they have it listed for more trucks than I thought it should be for. Ken had a good idea and just order two if you need more squish to get a proper seal. This picture below shows the part numbers and size difference. I could be wrong ? but I think you need the taller 3766204 number for your application. I would Call them and get a measurement.

http://i270.photobucket.com/albums/j.../72TL_0647.png

Lineman December 3rd, 2016 08:12 PM

Re: Calling All Two-Tones
 
Quote:

Originally Posted by gmccollector (Post 65057)
Hi Jay , sorry , I need more of them myself ! LOL .Too many trucks. The one they reproduce that AZKen posted , I have a feeling its part # 3766203 and its shorter , they have it listed for more trucks than I thought it should be for. Ken had a good idea and just order two if you need more squish to get a proper seal. This picture below shows the part numbers and size difference. I could be wrong ? but I think you need the taller 3766204 number for your application. I would Call them and get a measurement.

http://i270.photobucket.com/albums/j.../72TL_0647.png

Thanks.

Got the trans stuck out of gear today. I am pulling the truck from the body shop so now I have to find a place to keep it. Much less what I am going to do to finish it. Too much money invested now. Too many bad decisions.


All times are GMT +1. The time now is 12:42 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.