Lower hood latch
 

My lower hood latch needs to be adjusted so it will lock the hood down, however, it is badly fozen. The underside the assembly had a factory tack welded square nut and the top side has a hex nut, which I believe you loosen so you can adjust the height of the shaft.

I'm going to keep working on it, and hope for the best, but am ready to replace it.

I can find replacements on ebay but were ALL the years of the 60-66 GMC the same for the lower assemble. I know the upper changed when the hood changed.

Thanks

Re: Lower hood latch
 

My 66 has the adjustable shaft in the hood itself. It also has a slot for a screwdriver to adjust it, after you get the lock nut loosened. After it's loosened you can adjust the shaft to catch easier. More than likely you will need to back it out for a better latch fit. Donrm Cinti. Ohio 1966 351E fleetside

Re: Lower hood latch
 

I've soaked it several days in PB Blaster I'm going to try and mount in a vise to see if I can break her lose, if not it's off to eBay. Gee won't be the first thing I've replaced...... Heck, I figured I've bought a whole truck by now ;)

Re: Lower hood latch
 

Got it broke lose, early this morning - whew. had to use a bench vise as a hold back, probably has not moved since 1960. Blaster, primed and waiting for paint!

One more off the to do list.

Re: Lower hood latch
 

Did you happen to snap any pics of it?

Re: Lower hood latch
 

NO but will. I have 2 extr upper latches, I'll part one out, but will keep a spare.

Re: Lower hood latch
 

here are the pictures a few asked for