6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Transmissions and Rear Ends (https://6066gmcclub.com/forumdisplay.php?f=10)
-   -   Looking for info on swapping from a SM420 to a T5 (https://6066gmcclub.com/showthread.php?t=49689)

wcstory October 31st, 2016 02:41 AM

Looking for info on swapping from a SM420 to a T5
 
I picked up a 26 spline S10 WC T-5 off craigslist today.

A while ago I read a great thread on swapping a T-5 in place of a SM420 on a 305e. Now I cant find it. :pullinghairout: There is a good thread on T-5 on the 67-72 Chevy Trucks Forum in the 60-66 section.

Swapping manuals transmissions are a bit alien to me. All of my previous experience was auto trannys. I already had an original auto trans adapter for my 305e and was going to go to a 700r4 when I found the T-5. I'd rather keep the original look on a manual trans in my truck. With a OD I can keep my rear gearing and drive on the highway.

Winding out at 50 made for some long rides to work. :banghead:

wcstory November 14th, 2016 12:01 AM

Re: Looking for info on swapping from a SM420 to a T5
 
Well I'm progressing on my pre-swap planning.

Emailed Modern Driveline and received a call back from Jeff. They have an adapter to fit my 1993 T5 to my SM420 housing. The T5 I have is from an S10, but has a Ford bolt pattern. Their adapter is $160

I'll need a Ford throw out bearing and have to shave the clutch fork to fit the throw out bearing. Along with getting a new bearing support.

My T5 also has a VSS speedometer hook up. I decided to use a shop in Washington that modifies VSS housings for cable drives. Their fee is $250 plus shipping.

FetchMeAPepsi November 18th, 2016 01:58 PM

Re: Looking for info on swapping from a SM420 to a T5
 
Make sure you take a metal stamper and stamp out FORD TRANS on the trans and CUSTOM BELLHOUSING, then FORD T/O BEARING etc or 10 years from now you'll sell the truck to a junkyard because you can't remember what frankenstein parts you put in there.
Seen it happen so many times before. And if you don't your next owner will. :(

AZKen November 22nd, 2016 05:07 AM

Re: Looking for info on swapping from a SM420 to a T5
 
Why couldn't he put the paperwork in an aluminum can and encase it in the cab like one of those time capsule things? No? Stupid? Never mind.... With a picture of Trump and a Samsung exploding phone and a 2016 coin and a Pepsi? OK Ok....are there any 2016 coins?

wcstory November 22nd, 2016 02:21 PM

Re: Looking for info on swapping from a SM420 to a T5
 
I actually keep a log book of any changes made to the truck, non standard parts used, part numbers and sources

wcstory November 23rd, 2016 03:11 AM

Re: Looking for info on swapping from a SM420 to a T5
 
To clarify my reply

Up till now the only changes to my GMC have been for drive-ability and safety.

I replaced the ultra heavy utility body with a Stepside bed, added power steering and replaced the standard heater with a 1963 recirculating heater to unclutter the engine bay.


All times are GMT +1. The time now is 10:12 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.