6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Transmissions and Rear Ends (https://6066gmcclub.com/forumdisplay.php?f=10)
-   -   Friday afternoon 911 (https://6066gmcclub.com/showthread.php?t=49005)

Chevytruckdaddy September 11th, 2015 10:30 PM

Friday afternoon 911
 
Hello everyone after resurfacing the flywheel only 6000th and putting a new clutch pressure plate throughout bearing in it won't disengage. Clutch pedal down and try to put it in gear all I get is grinding. Any help on this would be awesome. 1962 GMC with and 305 with a 3 on the tree.

Scott

FetchMeAPepsi September 11th, 2015 10:34 PM

Re: Friday afternoon 911
 
Any fluid in the brake/clutch reservoir? :)

Chevytruckdaddy September 11th, 2015 10:36 PM

Re: Friday afternoon 911
 
Yes sir....

Chevytruckdaddy September 11th, 2015 10:38 PM

Re: Friday afternoon 911
 
When I pulled the inspection plate off and have someone press the clutch pedal I can see everything working where the pressure plate comes away from the fly wheel.

FetchMeAPepsi September 11th, 2015 10:48 PM

Re: Friday afternoon 911
 
DId you mash the pilot bearing or anything that would cause it to bind up there? If it's pulling away I can't think of anything that would keep them locked up. Did you put the right clutch in? If you bought a chevy clutch it won't work.


P.S. Jeannie please move this to the transmission forum. it's in general.

Chevytruckdaddy September 11th, 2015 11:03 PM

Re: Friday afternoon 911
 
I just double checked it it is for a 62 GMC one ton 2 Wheel drive motor.... When I press the pedal everything moves to disengage it just seems like it's not pulling far enough away.

FetchMeAPepsi September 11th, 2015 11:04 PM

Re: Friday afternoon 911
 
Quote:

Originally Posted by Chevytruckdaddy (Post 59140)
I just double checked it it is for a 62 GMC one ton 2 Wheel drive motor.... When I press the pedal everything moves to disengage it just seems like it's not pulling far enough away.


What's the make/model, etc of the clutch? If it's not exactly the right one (the pressure plate really) it won't disengage.

Chevytruckdaddy September 11th, 2015 11:23 PM

Re: Friday afternoon 911
 
Durlast NU1909

Chevytruckdaddy September 11th, 2015 11:24 PM

Re: Friday afternoon 911
 
Autozone

FetchMeAPepsi September 11th, 2015 11:29 PM

Re: Friday afternoon 911
 
Yeah that is definitely not the right clutch amigo. Check this thread here. I just went through the same thing.
http://6066gmcclub.com/forum/showthr...ewpost&t=47796


Sorry :( I know it's enough to make you spit nails.


All times are GMT +1. The time now is 10:03 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.