6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)

- GMC V6 and V12 Engines (https://6066gmcclub.com/forumdisplay.php?f=9)

- - Intake removal ? (https://6066gmcclub.com/showthread.php?t=47685)

sc1337

August 2nd, 2013 08:44 PM

Intake removal ?

I removed 8 bolts and the thing feels like its welded on. its not rusted that i can see. Is there a special way of removing it?

6066gmcguy

August 3rd, 2013 07:57 PM

Re: Intake removal ?

I'm not sure how many bolts hold it on, but once every thing is removed it should lift straight up, mite be stuck and need a bit of a pry on the underside to brake it loose, but be sure you have removed all the bolts first. double and triple check, you don't want to be braking stuff.

6066gmcguy

August 5th, 2013 04:42 AM

Re: Intake removal ?

4 Attachment(s)

I just pulled one tonight, I removed the bolt and smacked it with a hammer and it came right off.

I'm pulling the Piston & Rods out of this junk 305 to be givin away next month as awards at the Willard Round-up.

sc1337

August 6th, 2013 01:43 AM

Re: Intake removal ?

Quote:

Originally Posted by 6066gmcguy (Post 49640)

Ok, thanks. I gave up because I forgot I didn't have a new gasket yet haha, but
she is running just needs a new fuel pump.

FetchMeAPepsi

August 6th, 2013 03:48 PM

Re: Intake removal ?

Someone will tell you different if Im wrong but Im pretty sure you can use blue RTV Silicone to seal the intake down if you dont have or cant buy gaskets.

sc1337

August 8th, 2013 11:30 AM

Re: Intake removal ?

Quote:

Originally Posted by FetchMeAPepsi (Post 49653)

Someone will tell you different if Im wrong but Im pretty sure you can use blue RTV Silicone to seal the intake down if you dont have or cant buy gaskets.

alright i'll give that a try. thanks

All times are GMT +1. The time now is 05:41 PM.