Re: 65 Dash needed
 

Thanks, guys.
The turn signal indicator holes (at the ends) and the high beam hole (center top) meant for LED's are empty. I took the additional plunge and had Classic Instruments wire in LED turn signals green and high beam blue into the speedo at 3,9, and 12 o'clock.
I used to have some cab badging and trim pieces for the pickups, and since I never bought one (mine have all been Suburbans), I let the stuff go in barter.

Jim

Re: 65 Dash needed
 

That's sounds like a plan with the dash cluster I have a new wiring harnesses on the way and my cad is due any day from the paint shop I should make my deadline for Barrett Jackson
I think.
I have put together a full set of custom trim moldings wasn't cheap but the truck was originally was a custom truck so it is worthy of them
Any thoughts on the paint the truck was red and white and having a hard rime with where the white starts and stops on the cad. I did look and read the post on two tones but didn't see a 65. Would like to get the original look

Re: 65 Dash needed
 

One of the members recently posted about the paint schemes on these trucks, and his comment seemed to indicate that the 2-tone paint was slightly different depending on which plant the unit was built at.

Re: 65 Dash needed
 

Wow that is interesting that is why I'm seeing two styles

Re: 65 Dash needed
 

Starting to go back together ended up going with the back for the cab all white and around the doors. Should look ok with the custom trim I think.
I think I may take the white on the bed and continue it across the tailgate.?

Re: 65 Dash needed
 

Thanks for all the help on the dash went very well with the American autowire kit