Re: Toro Flow swaps?
I am not an expert but have been reading some info I have. List of parts needed. Bell housing . Clutch pressure plate and throw out bearing. Motor stands and v6 motor mounts. Throttle arm. V6 starter. V6 engine harness. GMC v6 radiator. The 230-250 radiator is a bit small for a 305 and way to small for a 351. If you are using the original alternator and regulator you will need to move the regulator to the passenger fender well. If you get a big truck motor you will also need the front timing gear cover off a light truck engine.
|