Turn Signal Switch kaput?
I'm working on a dozen things at once trying to get my '63 Suburban ready for inspection. I have non-working tail lights (dual filament bulb checks out OK), and the turn signal is not working correctly. The turn signal lever will not stay in position, right or left, unless held there. When held there, the appropriate front signal turns on but does not blink; nothing from the rears w/ turn signals or brakes. I am starting to work my way through the diagnostics on Jolly's pages, but I strongly suspect the in-the-column turn signal switch is broken. IF so, my understanding is a '63 replacement switch is a direct plug-in. Anyone been down this rabbit hole? I'd prefer to keep the existing steering column if possible.
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|