View Single Post
  #1  
Old April 6th, 2017, 03:38 AM
HOTRODJOHN HOTRODJOHN is offline
Senior Member
 
Join Date: Apr 2014
Location: Henderson, Nevada
Truck: 1964 GMC PICKUP, 1956 PONTIAC SAFARI, 1949 CADDY SEDANETTE
Age: 75
Posts: 179
Rep Power: 106
HOTRODJOHN is on a distinguished road
Default New a/c compressor bracket

I am sorry I have been out of touch but had some health problems and I was out of town for it. I have completed the Compressor bracket. It bolts on the drivers side top of the motor. If you have a drivers side Power Steering it will clear. I am just putting together a hardware kit so it will be all inclusive. Basically here is a set of photos of what it will look like. The Fab shop is just doing some final trimming. You will see 2 brackets, the one connected to the compressor is not the one I made. If you have a bracket that fits a York Compressor you will be able to bolt it directly to the new bracket. You can use the 2nd. or 3 rd. bottom groove on the balancer. The bracket I made is adjustable front to back and side to side. Please give me some feedback. John
Attached Images
File Type: jpg 305 ALTERNATOR.jpg (3.41 MB, Multiple views, 14 clicks)
Reply With Quote