[jturk]

Hey Everyone,
I've been working on a design for the console that I plan on building for the truck. This mockup is 11" wide in the interior and about 6" tall at the shifter. Plan on putting the stereo and HVAC controls in panel in front of the shifter. Will put 2 stainless steel cup holders in flat spot at the rear of the shifter and power window and power lock switches in small slanted panel at the back of the shifter. I've attached some pics of a cardboard pattern that I've come up with and assembled. Would really like to get comments about the design both good and bad so don't be bashful. Also if you have any suggestions to improve it let me know.