December 31st, 2015, 06:04 PM
|
|
-= Dues Paid =-
|
|
Join Date: Jan 2013
Location: Minneapolis, MN
Truck: 1961 3/4 ton 4x4 pickup
Posts: 50
Rep Power: 82
|
|
Re: Clutch Fork return spring replacement
Here are photos showing clutch fork return spring on my 1961 GMC K1500.
Photo Dsc06307:
Clutch fork return spring on clutch fork behind clutch slave cylinder.
(From below: forward on truck is to right.)
Photo Dsc06315:
Clutch fork return spring to right of oil pan and clutch assembly.
(From below: looking to truck's right side: forward on truck is to left.)
Photo Dsc06318:
Clutch fork return spring above frame.
(From below: forward on truck is to right.)
Photo Dsc06319:
Clutch fork return spring hooked into frame hole to left of right front shock absorber.
(From right: forward on truck is to right.)
Photo Dsc06320:
Shows general area of clutch fork return spring hooked into frame (shown in Photo Dsc06319) (but clutch fork return spring is not shown).
(From right: forward on truck is to right.)
Hope this helps and Happy New Year.
Culver Adams
Minneapolis, MN
1961 GMC K1500 with 478 GMC V6
|