[jagarra]

I just don't understand why these vendors just think supplying a part that is not correct is OK.

Well enough whining, they are all the same from the same off-shore low bid supplier.

Since this one is chamming up at the rear edge, I thought I would try to make it work better. I loosened the rear channel guide located on the striker side on the door, the one held with 2 3/8 headed bolt. Moved the wiper away from the door and filled the gap with some RTV to glue it to the edge of the door. I rolled the window up partially and stuck wedges in there to force the wiper over as far as possible.