Re: reproduction parts.
The Bad:
1) Reproduction door checks are no good.
2) The rubber boot for the 4spd manual transmission is too tight around the shifter so it cracks.
3) Deluxe heater seal kit has pieces that do not apply - so only two usable parts.
4) Hood bumper set contains two bumpers that are not usable on our trucks.
5) Rubber glove box bumpers do not fit.
6) Front fender inserts (in front near headlight area) are spot welded in place haphazardly.
7) Door seals did not stick to new paint job even with 3M glue.
8) Door whiskers are too thick not allowing window to go all the way up without extra effort.
9) Repro washer bottle cap does not fit OE washer bottle.
10) Repro washer bottle bracket does not have correct mounting base.
11) Aftermarket headlight switches fail prematurely.
12) 4spd tranny seal between hump and tranny is wrong shape and way too thin.
13) Federside taillight bulb sockets & wiring
The Best In My Opinion:
1) Fenderside front bed panel
2) Reproduction front parking light wire harness
3) Glove box liner
4) GMC Pauls 67-72 door gasket set
5) Engine wiring harness for V6
|