View Single Post
  #14  
Old January 31st, 2017, 09:06 PM
Cuttyman9 Cuttyman9 is offline
Member
 
Join Date: Dec 2016
Location: Sacramento, ca
Truck: I don't own one - YET!
Posts: 80
Rep Power: 66
Cuttyman9 is on a distinguished road
Default Re: Project Blown 305

Yeah that would be awesome on a set of rockers for an FE, 1972redneck I'll try to shoot ya a PM today about it.

Sounds like a solid build! I'm sure you'll make a good chunk of torque.

Thunderv12 sells flanges for exhaust if that's helpful for both magnum and normal exhaust ports.

I may try to get a few sets of intake flanges cut in case others would like to build a manifold as well.

Felpro sells a gasket kit for the 305's on summit, I just recently received mine but haven't opened it.

My machinist out here has done a few of these so that's good news.
I think if I drop in some 60 over flat top Chevy BB Pistons I should be set, then it's just a matter of matching up some rods and stroke it to fit.

Based on info I found online with various sources the deck height is roughly 11.5"


I'll post my findings soon.
__________________
1936 Chevy master coupe unknown drivetrain
1966 C20 350/sm420 (body swap to 454/sm465 4x4)
1967 Chevelle (duramax/4l85e planned)
1971 Triumph Stag 3.0 v8/4 speed
1971 Cutlass 350olds/350
1975 Trans am 455/t56
1991 300zx TT
1992 Celica GT 2Gr v6 swap
1999 F150 4.6/4r70w (2.1KB, t56 planned)
1992 Stealth RT/TT
1992 Typhoon
1988 Corolla GTS
1992 SVX manual swap
1966 mustang GT (burnt in barn fire but will be back)
1966 polara wagon (383/727)
1953 dodge B series pickup.
Reply With Quote