Hey Guys,
I have a 1964 Vintage 305 V6 in an old school Hyster H150E forklift at work. I installed a new distributor, coil, plugs and plug wires. I've set the point gap at .016 and I used a dwell meter to confirm the dwell was at 32 degrees. I cannot for the life of me find the timing mark. I am unfamiliar with these engines. I know that there are three marks on the balancer. I'm assuming 7.5 degrees advance, TDC and 7.5 Retard. I cannot find the mark on the block to time it to. Any help appreciated!
PS any literature, shop manuals, etc. on this motor is greatly appreciated!
