[jbgroby]

Update, I got it fixed, I did not realize I had the tail light wire on the wrong post in the HL switch. I now have running tail lights with headlights on, so I can safetly drive at night. BUT, I have no break light when I hit the pedal on the drivers side yet. Still working on this.

Also the harness comes with a 30 amp relay for the head lights, but when I turn on the high beams, after about 5-7 seconds all the headlight go out. I turn the lights off and then they come back on. The dash lights and spotlight never have any problems. I'm going to try to see of the high beam floor switch is the issue (new and came with wiring kit).