6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > GMC V6 and V12 Engines


GMC V6 and V12 Engines Engine repair and rebuilding

Reply
 
Thread Tools
  #1  
Old June 21st, 2017, 10:49 PM
wcstory wcstory is offline
-= Dues Paid =-
 
Join Date: Jan 2015
Location: Mashpee, Ma
Truck: 1966 2503
Age: 56
Posts: 65
Rep Power: 73
wcstory is on a distinguished road
Default Anyone with a Holley 4412 500 on a 305

Doing a swap to a Holley 4412 500cfm. I'm changing from the rod linkage to a 71-72 pedal and cable setup because I'll be changing to a 700r4 soon.

What throttle bracket did you use? Pictures please.
Reply With Quote
  #2  
Old June 23rd, 2017, 12:04 AM
James James is offline
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 432
Rep Power: 199
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: Anyone with a Holley 4412 500 on a 305

Here is the linkage for the TH700R4 cable:
https://www.summitracing.com/parts/hly-20-121/overview/

This might be what you need for the throttle cable:
https://www.summitracing.com/parts/hly-20-14/overview/

Other brackets for your Holley:
https://www.summitracing.com/search/...d=transmission
Reply With Quote
  #3  
Old June 23rd, 2017, 12:08 AM
James James is offline
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 432
Rep Power: 199
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: Anyone with a Holley 4412 500 on a 305

I too am planning on doing this swap (don't know when) but I did notice the bore size in my intake is smaller than the 4412 throttle bore. I am going to enlarge the intake bore to match the 4412 throttle bore (if I didn't do this it would be like running a restrictor plate like Nascar has done).
Reply With Quote
  #4  
Old June 23rd, 2017, 12:09 AM
James James is offline
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 432
Rep Power: 199
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: Anyone with a Holley 4412 500 on a 305

Most of the 4 barrels brackets for a Model 4150/4160 will work with the 4412.
Reply With Quote
  #5  
Old June 23rd, 2017, 02:33 AM
wcstory wcstory is offline
-= Dues Paid =-
 
Join Date: Jan 2015
Location: Mashpee, Ma
Truck: 1966 2503
Age: 56
Posts: 65
Rep Power: 73
wcstory is on a distinguished road
Default Re: Anyone with a Holley 4412 500 on a 305

Thank you

I ordered a 24" throttle cable and it is too long. The Holley 20-95 bracket places the throttle bracket too close to the throttle are on the carb.

I scribed the opening of the adapter plate on the manifold and used a carbide die grinder to match the opening size.
Reply With Quote
  #6  
Old June 23rd, 2017, 02:12 PM
TJ's GMC's Avatar
TJ's GMC TJ's GMC is offline
Senior Member
 
Join Date: Mar 2015
Location: Cave Junction, Oregon
Truck: 1964 GMC 1500 LWB Wideside 305E V6.
Posts: 1,341
Rep Power: 399
TJ's GMC is on a distinguished road
Default Re: Anyone with a Holley 4412 500 on a 305

You can't cut the cable to length? When I got my lokar throttle cable I cut the housing back and then cut the wire to the length I needed with an air cutter.
__________________
"Excuse the rust I use my truck"
1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1964 Chevy C20 292/SM420
1966 Chevy C10 292 hotrod 6/TKO600


My youtube channel aka Military Chevy:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old June 25th, 2017, 10:32 PM
wcstory wcstory is offline
-= Dues Paid =-
 
Join Date: Jan 2015
Location: Mashpee, Ma
Truck: 1966 2503
Age: 56
Posts: 65
Rep Power: 73
wcstory is on a distinguished road
Default Re: Anyone with a Holley 4412 500 on a 305

TJ, the throttle cable is the factory GM with the molded snap fitting for the carb side bracket and firewall
Reply With Quote
  #8  
Old June 27th, 2017, 01:24 AM
wcstory wcstory is offline
-= Dues Paid =-
 
Join Date: Jan 2015
Location: Mashpee, Ma
Truck: 1966 2503
Age: 56
Posts: 65
Rep Power: 73
wcstory is on a distinguished road
Default Re: Anyone with a Holley 4412 500 on a 305

Quote:
Originally Posted by wcstory View Post
TJ, the throttle cable is the factory GM with the molded snap fitting for the carb side bracket and firewall


TJ, I stand corrected. I decided I was going to try cutting my cable so i started trying to get the firewall side of the fitting removed. Low and behold it is not completely bonded, as I thought. I was able to get the fitting loose. I cut the crimped stops off and shortened the cable. once I get the cable and carb fully installed I going to epoxy the fitting permanently in place. Will post some pictures tomorrow
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Holley 4412 bobdylan GMC V6 and V12 Engines 3 September 25th, 2016 03:00 AM
Holley 500 4412 Archiver Previous Forum Posts 0 January 14th, 2011 12:12 AM
Re: Holley 4412 Archiver Previous Forum Posts 0 July 24th, 2010 01:32 AM
Holley 4412 Archiver Previous Forum Posts 0 July 23rd, 2010 01:27 AM
2300 Holley 4412 Archiver Previous Forum Posts 0 December 25th, 2004 03:20 AM


All times are GMT +1. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710454455|0