6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Wheels, Tires, Suspension and Brakes
#Sponsored

Wheels, Tires, Suspension and Brakes Keep them doggies rollin', rawhide

Reply
 
Thread Tools
  #1  
Old March 9th, 2013, 12:13 AM
Strud Strud is offline
Junior Member
 
Join Date: Jan 2013
Location: Esko, MN
Truck: 1966 GMC 1500
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 76
Strud is on a distinguished road
Default dana 60 full floater rear axle

I have a local brake & clutch shop questioning the fact that my 66 1502 GMC has a dana 60 full floater axle. All of his books show the 1500 series as a 1/2 ton. (keep in mind this shop has 50+years experience and is one of the few shops that can re-line my rear brake shoes) The biggest items in question are the fact than not only is the dana 60 stock but the 12" x 2.5" drum/shoe size.

can someone shed some light? Is this in fact stock, or was it swapped at some time? when I go to Napa, their system and the old books only show 11-5/32" drum size.

I did bring the drums and shoes and they will turn and re-line the shoes but I am still questioning if it stock. More for my knowledge than anything else.

Thanks in advance.

Scott
1966 GMC 1502 w/305 V-6
1966 GMC Suburban 4x4 w/305 V-6
__________________
Scott "Strud" Strudwick

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1966 GMC 1500 305E V-6
02 GMC Sierra 2500 HD
Esko, MN
Reply With Quote
  #2  
Old March 9th, 2013, 08:16 AM
raycow raycow is offline
Senior Member
 
Join Date: Jan 2013
Location: San Francisco, CA
Truck: 1960 C-10 Short Fleet
Posts: 129
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 105
raycow is on a distinguished road
Default Re: dana 60 full floater rear axle

Does your rear take 8 lug wheels or 6 lug? How about the front?

Ray
Reply With Quote
  #3  
Old March 9th, 2013, 11:53 PM
Strud Strud is offline
Junior Member
 
Join Date: Jan 2013
Location: Esko, MN
Truck: 1966 GMC 1500
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 76
Strud is on a distinguished road
Default Re: dana 60 full floater rear axle

8-lug front & rear
__________________
Scott "Strud" Strudwick

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1966 GMC 1500 305E V-6
02 GMC Sierra 2500 HD
Esko, MN
Reply With Quote
  #4  
Old March 10th, 2013, 01:09 AM
BarryGMC BarryGMC is offline
Banned
 
Join Date: Jan 2013
Location: Banned City
Truck: None. Sold them all and became a hermit.
Posts: 591
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
BarryGMC is on a distinguished road
Default Re: dana 60 full floater rear axle

66 gmc 1000 is a 1/2 ton,1500 is a 3/4 ton , and 2500 is a one ton.
Reply With Quote
  #5  
Old March 12th, 2013, 03:42 AM
Strud Strud is offline
Junior Member
 
Join Date: Jan 2013
Location: Esko, MN
Truck: 1966 GMC 1500
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 76
Strud is on a distinguished road
Default Re: dana 60 full floater rear axle

My question is if the 3/4 ton 1500 had a full floater dana 60 rear axle? with 12"x2.5" rear shoes. I know that it is a 3/4 ton. All I find and all of the various parts stores show the 3/4 ton having 11-5/32"x2" rear shoes. Trying to attempt to see if the rear axle is stock or if it was swapped at some time. I am having trouble finding parts because of this.
__________________
Scott "Strud" Strudwick

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1966 GMC 1500 305E V-6
02 GMC Sierra 2500 HD
Esko, MN
Reply With Quote
  #6  
Old March 12th, 2013, 05:32 PM
David R Leifheit's Avatar
David R Leifheit David R Leifheit is offline
Senior Member
 
Join Date: Jan 2013
Location: Dallas, Oregon
Truck: 1960-1966 1000-4000 series
Age: 63
Posts: 285
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 170
David R Leifheit is a jewel in the roughDavid R Leifheit is a jewel in the roughDavid R Leifheit is a jewel in the rough
Default Re: dana 60 full floater rear axle

Keep in mind that the auto parts stores, and many shops, use data bases which call for Chevrolet parts as if there was no difference between trucks. Which means there are often times when the parts you need are "wrong" in their opinion.

It is easier, in my opinion, to take in the old part or the numbers off an old part so they can order the correct replacement.

My '63 had a LOT of those issues, since it is a 2500 (1-ton GMC, 3/4 ton Chev).
Had to replace the master cylinder, they argue it doesn't have hydraulic clutch (GMC did, Chev didn't) so got the wrong part the first time. Rear wheel cylinders are the same on a Chev, right and left on the GMC (computer only shows GMC and Chev as the same). And don't even get into the 1-ton v. 3/4 ton differences...

Whatever your truck has for brake shoes now, if they work and fit, are likely the correct ones for your truck. Regardless of what a shop or parts house tells you.

According to the manual X-6523
Front Brakes on a 1500 are 11 x 2-3/4
Rear Brakes on a 1500 are 12 x 2-1/2

So it looks like you have stock brakes...
__________________
--
- David R Leifheit
in Dallas, Oregon
mailto:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

(2) 1961 1500
1962 1000
1963 2500
1963 4000
1964 2500
Reply With Quote
  #7  
Old March 13th, 2013, 08:03 AM
6066gmcguy's Avatar
6066gmcguy 6066gmcguy is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: Honeyville, Utah
Truck: 1965 3500 Rescue Squad
Age: 64
Posts: 613
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 229
6066gmcguy is on a distinguished road
Default Re: dana 60 full floater rear axle

Tell the parts guy that model numbers NOW are not the same as back in the 60s, also tell him he needs to look up GMC Truck in the books and NOT Chevrolet. If they still tell you your worng, tell them to come over and look at your truck.

Q. My question is if the 3/4 ton 1500 had a full floater dana 60 rear axle?
A. Yes. Do you not know what a full floater axle is? it is any axle when the shaft the turns the wheel can be pulled out with having to put the wheels and drums, the axle is floating in the housing and does not support any weight, the weight is carried on the spindle on the axle housing.

Rear Drive Axle Information


If your looking for brakes try the Known Good Part Numbers
page of MY website.
Attached Images
File Type: jpg AxleTypes.jpg (31.9 KB, Multiple views, 17 clicks)
__________________
Links to Other Places:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
.
the
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
on FacePage.
Owner of:
1965 GMC 3500 Custom Rescue Squad {Black Built Bodies}
1968 Ford Galaxie 500 Convertible
2006 Yamaha Rhino 450
2008 GMC HHR Panel.

Last edited by 6066gmcguy; March 13th, 2013 at 05:22 PM.
Reply With Quote
  #8  
Old April 19th, 2013, 12:09 AM
Strud Strud is offline
Junior Member
 
Join Date: Jan 2013
Location: Esko, MN
Truck: 1966 GMC 1500
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 76
Strud is on a distinguished road
Default Re: dana 60 full floater rear axle

I am now having problems finding the correct brake hardware kit. I was able to get the spring kit but when I got the adjuster kit, the primary adjusting lever was wrong and the star adjuster was wrong. has anyone had success in finding the hardware kits?

I did already look at the known good parts list and you don't list any hardware kits.

and I do know what a full floater axle is. I was only questioning the size of the shoes/drums and if it was correct.

My local source was able to turn my drums and reline the shoes. the wheel cylinders were an exact fit. I was able to get the rear parking brake cables from LMC trucks. They were correct. I tried brother truck parts and jim carter truck parts on the cables and they both were wrong. All I have left to find is the correct adjuster kits. the new inner and outer bearings were correct also. although it helps having the old bearing/race/seal numbers to go by. Hardware kits not so fortunate.

If anyone has any info on the adjuster part numbers, I would be most grateful.

Once I have everything I will post a list of all of the part #'s & mfg.
__________________
Scott "Strud" Strudwick

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

1966 GMC 1500 305E V-6
02 GMC Sierra 2500 HD
Esko, MN
Reply With Quote
  #9  
Old April 20th, 2013, 01:51 AM
donrm donrm is offline
Member
 
Join Date: Mar 2013
Location: Cincinnati,Ohio
Truck: 1966 1/2 ton fleetside 8' bed
Age: 68
Posts: 43
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 83
donrm is on a distinguished road
Default Re: dana 60 full floater rear axle

Just check rockauto.com. I ordered my rear brake shoes from them, & I remember having to measure my shoes & my drum to make sure. Their prices are more than fair.Don Maurath GMC member 1966 GMC 8' fleetside Cinti. Ohio
Reply With Quote
  #10  
Old July 25th, 2015, 09:07 PM
Texas63GMC Texas63GMC is offline
Member
 
Join Date: Jan 2013
Location: texas
Truck: n/a
Posts: 88
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 95
Texas63GMC is on a distinguished road
Default Re: dana 60 full floater rear axle

Strud, did you ever find a part number for the self adjusters?
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
dana 44 frt and rear axle service bulletin Archiver Previous Forum Posts 1 March 21st, 2012 05:05 AM
Re: [6066 GMC] 1964 Dana 44 rear axle - looking for posi unit Archiver Previous Forum Posts 0 August 20th, 2008 11:59 AM
1964 Dana 44 rear axle - looking for posi unit Archiver Previous Forum Posts 0 August 20th, 2008 04:09 AM
Re: [6066 GMC] 1964 Dana 44 rear axle - looking for posi unit Archiver Previous Forum Posts 0 August 20th, 2008 01:19 AM


All times are GMT +1. The time now is 12:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 841730414881|1729207116|0