6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > GMC V6 and V12 Engines


GMC V6 and V12 Engines Engine repair and rebuilding

Reply
 
Thread Tools
  #11  
Old March 12th, 2013, 07:15 PM
GMC-HDV6 GMC-HDV6 is offline
Temporarily Suspended
 
Join Date: Feb 2013
Location: Madison,WI
Truck: 1962 GMC dually
Age: 43
Posts: 15
Rep Power: 0
GMC-HDV6 is on a distinguished road
Default Re: Newer Oils in Older Engines

I guess I was miss remembering it was 1265-1575ppm its been a while.

Amsoil high zinc oil:
http://www.amsoil.lube-direct.com/20...nc-oil-amsoil/

AMSOIL High Zinc Oil Recommendations:

Z-ROD™ 10W-30 Synthetic Motor Oil (ZRT)

Phosphorus Level (ppm) 1320

Zinc Level (ppm) 1440

Z-ROD™ 20W-50 Synthetic Motor Oil (ZRF)

Phosphorus Level (ppm) 1320

Zinc Level (ppm) 1440

Premium Protection 10W-40 Synthetic Motor Oil (AMO)

Phosphorus Level (ppm) 1265

Zinc Level (ppm) 1378

Premium Protection 20W-50 Synthetic Motor Oil (ARO)

Phosphorus Level (ppm) 1266

Zinc Level (ppm) 1379

Series 3000 5W-30Synthetic Heavy Duty Diesel Oil (HDD)

Phosphorus Level (ppm) 1266

Zinc Level (ppm) 1379

15W-40 Synthetic HeavyDuty Diesel and Marine Motor Oil (AME)

Phosphorus Level (ppm) 1267

Zinc Level (ppm) 1377

Dominator® 5W-20 Synthetic Racing Oil (RD20)

Phosphorus Level (ppm) 1424

Zinc Level (ppm) 1575

Dominator® 10W-30Synthetic Racing Oil (RD30)

Phosphorus Level (ppm) 1424

Zinc Level (ppm) 1575

Dominator® 15W-50Synthetic Racing Oil (RD50)

Phosphorus Level (ppm) 1424

Zinc Level (ppm) 1575

SAE 60 Super Heavy Weight Synthetic Racing Oil (AHR)

Phosphorus Level (ppm) 1265

Zinc Level (ppm) 1375

I hope this helps I added the link above to show where I got my info.
Mike

Last edited by GMC-HDV6; March 12th, 2013 at 07:28 PM.
Reply With Quote
  #12  
Old March 12th, 2013, 07:43 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,724
Rep Power: 545
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: Newer Oils in Older Engines

Thanks Mike. I'll take a look at those and add them to my options.
Reply With Quote
  #13  
Old March 12th, 2013, 11:27 PM
GMC-HDV6 GMC-HDV6 is offline
Temporarily Suspended
 
Join Date: Feb 2013
Location: Madison,WI
Truck: 1962 GMC dually
Age: 43
Posts: 15
Rep Power: 0
GMC-HDV6 is on a distinguished road
Default Re: Newer Oils in Older Engines

I been using the Premium Protection 10w-40, 20w-50, and the SAE60 in my old vintage industrial and hipo engines for about 12 years now with good luck.

Just passing what I learned along to others
Mike
Reply With Quote
  #14  
Old March 25th, 2013, 05:02 AM
BobBray BobBray is offline
-= Dues Paid =-
 
Join Date: Feb 2013
Location: Los Angeles, CA.
Truck: 1967 CM 2500
Posts: 246
Rep Power: 148
BobBray will become famous soon enoughBobBray will become famous soon enough
Default Re: Newer Oils in Older Engines

I use Valvoline Racing 30W. No problems, plenty of lumps on my camshaft.
Reply With Quote
  #15  
Old August 5th, 2013, 11:55 PM
TommyG TommyG is offline
Junior Member
 
Join Date: Feb 2013
Location: California
Truck: 1963 1000
Posts: 4
Rep Power: 0
TommyG is on a distinguished road
Default Re: Newer Oils in Older Engines

A little late to this post but I just put straight Rotella SAE-30 in my '63 1000 recently (305E V6). Most of the temps I deal with are 35F (winter) - 95F (summer).

Any thoughts on if that oil choice is a good or bad idea? I thought I had been using it on this truck but thinking back on it I have a feeling I might have bought it for a bunch of old motorcycles I've been working on at one point...

Thanks,

Tom
Reply With Quote
  #16  
Old August 6th, 2013, 12:21 AM
pasadenajim pasadenajim is offline
-= Extreme Supporter =-
 
Join Date: Jan 2013
Location: Phoenix, AZ
Truck: 1965 K1500
Posts: 76
Rep Power: 89
pasadenajim is on a distinguished road
Default Re: Newer Oils in Older Engines

Hey "Get ME", if you would, pls keep me (us) informed on this issue. I, for one, will be looking to put fire to the 305 within the next 5 weeks or so and would like to know how you come out on your oil selection and how it works for you. Thanks, Jim Hyde, Phx AZ
Reply With Quote
  #17  
Old August 6th, 2013, 01:55 AM
pasadenajim pasadenajim is offline
-= Extreme Supporter =-
 
Join Date: Jan 2013
Location: Phoenix, AZ
Truck: 1965 K1500
Posts: 76
Rep Power: 89
pasadenajim is on a distinguished road
Default Re: Newer Oils in Older Engines

"Fetch Me" another question for you, what are your thoughts on Aluminum 2 Row crossflow radiators for these 305s?? Remember, I live in Phx AZ and in the summertime it is HOT out here so I gotta keep this thing as cool as possible.
Reply With Quote
  #18  
Old August 6th, 2013, 05:01 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,724
Rep Power: 545
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: Newer Oils in Older Engines

About oils for now Im running 10w40 with STP zinc additive. Rotella is probably what Id go with if it were less expensive but wow oil is crazy high now. Thanks Obama!

Quote:
Originally Posted by pasadenajim View Post
"Fetch Me" another question for you, what are your thoughts on Aluminum 2 Row crossflow radiators for these 305s?? Remember, I live in Phx AZ and in the summertime it is HOT out here so I gotta keep this thing as cool as possible.
I havent got to my exhaust yet. Its still two stock rams horns bolted to a piece of stock broken off pipe under the cab. Smells like crap when you start her, but I've almost decided I don't want to bend any pipe till I got the motor out and worked on then back in again.
Right now my plan is to take off the rams horns, sandblast them and coat them with Calyx manifold dressing. Then Ill reinstall them using manifold gaskets coated with red RTV silicone for a better seal like they do racing engines.
Then ill run 2 1/2 inch aluminum pipe with a crossover and dual mufflers as quiet as I can get them.

The way i see it the aluminum will be lighter and last longer without rusting. The expansion of aluminum bolted to iron might be a problem but I think they put adapter gaskets on for the expansion so it shouldnt be too bad. Someone else might weigh in on it.




btw
Shell Rotella has 1400 PPM of Zinc, Valvoline Racing Oil is 1700 PPM, and Chevron Delo all meet the minimum for use with Flat Tappet Cams, and are a cheap alternative for breaking in a motor. Red Line also has a ZDDP addititvie that runs about 12.00 and treats 12 quarts
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #19  
Old August 25th, 2013, 10:15 PM
Quigley's Avatar
Quigley Quigley is offline
Senior Member
 
Join Date: Mar 2013
Location: New Hampton,Iowa
Truck: 1966 1000 Wideside 1962 1500 Wideside 401 Magnum
Posts: 187
Rep Power: 131
Quigley will become famous soon enoughQuigley will become famous soon enough
Default Re: Newer Oils in Older Engines

Anybody using or know anything about Chevron Delo 400LE.I have been using it in a ISX Cummins for 900000 miles with no problems.20000 mile service intervals and NO consumption. I am just breaking in a 305E and was thinking about changing to this oil. Any drawbacks? Thanks,Dave
Reply With Quote
  #20  
Old September 21st, 2013, 10:33 AM
Rockdriller's Avatar
Rockdriller Rockdriller is offline
Senior Member
 
Join Date: Sep 2013
Location: Orient, Oregon
Truck: '63 K1000, '66 C4000
Age: 63
Posts: 120
Rep Power: 97
Rockdriller is on a distinguished road
Default Re: Newer Oils in Older Engines

Quote:
Originally Posted by George Bongert View Post
Greetings bigblockv6!

I did the research you suggested, and indeed, my 99 Bonneville (3.8 V-6) does have a roller cam as you said. I also visited the official Mobil 1 Website, and came up with some interesting information regarding Mobil 1 Synthetic Oil and flat tappet camshafts.

Quote from the website:
Question:

"Does Mobil 1 contain the Additive for Flat Tappet Cams?"

Mobil 1's Answer:

For older, flat tappet engines where wear may be more of a concern, we offer a number of synthetic oils which are higher in phosphorous than API SN/ILSAC GF-5 oils. These include Mobil 1 15W-50 (1,200 ppm), Mobil 1 0W-40 (1,000 ppm), and High Mileage 5W-30, 10W-30 and 10W-40 (900 ppm). For all newer engines and flat tappet engines in normal service, API SN/ISLAC GF-5 oils are preferred for better fuel economy and for the protection of catalytic systems with lower phosphorous (800ppm)."

This is a direct verbatim quote from Mobil 1's website which was updated in April of 2012.

My interpretation of this is that there is no reason not to use (or fear using) Mobil 1 15W-50 Synthetic Oil in a flat tappet engine where cam wear may be a concern. As I stated previously, I personally would have no reservations using Mobil 1 15W-50 Synthetic Oil in any engine that I would personally own, whether it would be equipped with a flat tappet cam, or a roller cam. Thanks for urging me to do a little research. I got a little education on both the GM 3.8 V-6, and the subject of Synthetic Oil vs ordinary engine oil. I have bookmarked Mobil 1's website for future reference since it addresses many more engine and lubrication issues than just those of flat tappet camshaft engines.
I sure might be missing something.......but Mobils rep seems to be "skirting" the issue at hand here in his response....Scuff and Friction Wear to cam lobes & tappets and rockers & valve stems.
Zinc.....Zinc, Zinc and more Zinc.

At least that's what I'm thinkin.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newer OEM GM Wheels - What Fits (Already Searched) Archiver Previous Forum Posts 0 February 7th, 2006 12:19 AM
Re: [6066 GMC] Upgrade to newer Steering Wheel Archiver Previous Forum Posts 0 January 7th, 2006 07:13 AM
RE: [6066 GMC] Upgrade to newer Steering Wheel Archiver Previous Forum Posts 0 January 7th, 2006 12:49 AM
Re: [6066 GMC] Upgrade to newer Steering Wheel Archiver Previous Forum Posts 0 January 7th, 2006 12:14 AM
Upgrade to newer Steering Wheel Archiver Previous Forum Posts 0 January 6th, 2006 12:44 AM


All times are GMT +1. The time now is 09:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 681711554703|1710406571|0