1962 Rear Brake Lines

[Soonersfanru2]

Ok needing some help with some parts or how to find them? Parts store can't find anything if the computer don't show them. I need front brake wheel cylinders they show same as front but are not. I need the oring for the oil filter the one they say fits is 4 inches and mine needs to be 4 3/8 to fit right I can't stop the oil leak. I need the front and back brake hoses not in there computer. Any help would be appreciated. If I had brakes I could be driving it thanks.

[jbgroby]

LMC has the correct parts you need.

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=95

Jake
Lacombe, LA.

[Soonersfanru2]

Thank you very much

[Schroer1962v3000Dump]

I split all my replacement parts between Napa and Oreilly's. You can use the LMC part numbers to cross reference for other brands and prices at there stores or on a search engine online.

[VegasGMC]

I found Rock Auto has a lot of OEM parts usually at very good prices. Just ordered some from them.

[Soonersfanru2]

Alright guys I think I have found everything. I put a Holley 500 carb on have it running good ready to take it for a spin if only I could find the rear brake hose from frame to the rear end. I ran all new brake lines and hoses. But that hose has been dicontinued. Lmc don't even have it for the 62 model. And I cut my old one off. Any ideas would be helpful thanks.

[Soonersfanru2]

I found it at American truck 48 dollars they must have known I needed it.

[Texas63GMC]

have you tried Inline tube?

[Hobie]

Is it the line that has the bulkhead T fitted right into the rubber line?? Female at the top?

If so I got mine from Golden State Truck Parts

[Soonersfanru2]

The one I found the t fitting is separate.