View Full Version : Need Torque Spec for 305 heads
wcstory
July 4th, 2015, 10:00 PM
Ready to reassemble heads. What the torque spec on the rocker arm cross bar bolts?
TJ's GMC
July 5th, 2015, 12:28 AM
Tight. lol That's how I did mine.
wcstory
July 5th, 2015, 03:15 AM
Tight. lol That's how I did mine.
I can do that.
lizziemeister'sV6
July 5th, 2015, 01:06 PM
Just did a 351E - rocker bolts must have a flat washer and be torqued to 25 foot pounds = good Luck :thumbsup:
abus319
July 6th, 2015, 03:44 PM
I see you already have them, but heres the list in the 1960 manual.
wcstory
July 6th, 2015, 11:54 PM
Found the proper torque sequence......after I torqued mine down luckily I guessed right on the most on the center 8 and close enough on the outer 6
Lizzie & abus :yourock:
AZKen
July 7th, 2015, 09:39 PM
I usually tighten them until my elbow clicks.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.