351 Crank pulley question

[AZKen]

Does a 351 crank pulley just unbolt from balancer like a 305? No need to pull balancer off?

[lizziemeister'sV6]

hello - 305 and 351 engines doesn't have a balancer up front on the crankshaft - the bolt you see just screws in the crank end and holds the pulley hub on -just unbolt and the hub should pull right off - it's on a keyway:thumbsup:

[AZKen]

Agreed no balancer, just a hub I guess, But I have 6 bolts surrounding the big bolt. I have already taken off once but forget. Take off big bolt AND the 6 bolts? Does it matter if one groove or two groove pulley?

[lizziemeister'sV6]

Morning - doesn't matter how many groove pulley it is - the 6 bolts are unevenly spaced so the pulley only fits the hub one way - I found it easier to remove the pulley or pulleys and then loosen/remove the big bolt that holds the hub on - should pull off easy.:goodluck:

[AZKen]

Thanks Lizzie

[bozzhogg]

AZ KEN I know this off topic but I just wanted to let you know I got the $10.00 dollars you sent back. Thanks. Ross.Hodges with '66 GMC with '12 flat bed.:yourock:

[AZKen]

Good, thanks Bozz