PDA

View Full Version : Friday afternoon 911

Chevytruckdaddy
September 11th, 2015, 10:30 PM
Hello everyone after resurfacing the flywheel only 6000th and putting a new clutch pressure plate throughout bearing in it won't disengage. Clutch pedal down and try to put it in gear all I get is grinding. Any help on this would be awesome. 1962 GMC with and 305 with a 3 on the tree.

Scott
FetchMeAPepsi
September 11th, 2015, 10:34 PM
Any fluid in the brake/clutch reservoir? :)
Chevytruckdaddy
September 11th, 2015, 10:36 PM
Yes sir....
Chevytruckdaddy
September 11th, 2015, 10:38 PM
When I pulled the inspection plate off and have someone press the clutch pedal I can see everything working where the pressure plate comes away from the fly wheel.
FetchMeAPepsi
September 11th, 2015, 10:48 PM
DId you mash the pilot bearing or anything that would cause it to bind up there? If it's pulling away I can't think of anything that would keep them locked up. Did you put the right clutch in? If you bought a chevy clutch it won't work.


P.S. Jeannie please move this to the transmission forum. it's in general.
Chevytruckdaddy
September 11th, 2015, 11:03 PM
I just double checked it it is for a 62 GMC one ton 2 Wheel drive motor.... When I press the pedal everything moves to disengage it just seems like it's not pulling far enough away.
FetchMeAPepsi
September 11th, 2015, 11:04 PM
I just double checked it it is for a 62 GMC one ton 2 Wheel drive motor.... When I press the pedal everything moves to disengage it just seems like it's not pulling far enough away.


What's the make/model, etc of the clutch? If it's not exactly the right one (the pressure plate really) it won't disengage.
Chevytruckdaddy
September 11th, 2015, 11:23 PM
Durlast NU1909
Chevytruckdaddy
September 11th, 2015, 11:24 PM
Autozone
FetchMeAPepsi
September 11th, 2015, 11:29 PM
Yeah that is definitely not the right clutch amigo. Check this thread here. I just went through the same thing.
http://6066gmcclub.com/forum/showthread.php?goto=newpost&t=47796


Sorry :( I know it's enough to make you spit nails.
Chevytruckdaddy
September 11th, 2015, 11:47 PM
Thank you everyone.... I'll try the advanced auto unit tomorrow!!!
Chevytruckdaddy
September 11th, 2015, 11:58 PM
Thank you everyone.... I appreciate the help ....
FetchMeAPepsi
September 12th, 2015, 12:01 AM
No prob bud. Let us know how it goes :)
Chevytruckdaddy
September 12th, 2015, 12:04 AM
I've ordered the clutch assembly you recommended it will be here in the morning after I install it I'll give you guys an update have a good evening
carryallman
May 1st, 2017, 10:18 PM
MAYBE THE DISC IS IN BACKWARDS ?? its easy to do ???see if part of disc is hitting on flywheel bolts -when apart ??