lifters & push rods

[HOTRODJOHN]

Does anyone know the difference between 351 and 305E lifters. I need a set for my 305E. Thanks, John

[bigblockv6]

As long as they are solid lifters they are all the same for 305,351,379,401,432& 478 V6 engines. You can also use Chevrolet 235 inline six solid lifters.:thumbsup:

[HOTRODJOHN]

thank. any particular year for the 235 or are they all the same

[bigblockv6]

I can't tell if all years are the same for the 235:banghead: but not all 235 engines had solid lifters some had hydraulic lifters

[TJ's GMC]

I believe the 60's 235 was hydraulic. That gen 6 cylinder I don't know much about. You could contact Tom Langdon @ Langdon's Stovebolt. com and he could tell you. 235's must have had awfully large solid lifters...I remember pulling one out of my 305 and that thing was huge!

[bobdylan]

I have heard that 235 1953 and beyond the automatics had hydraulic lifters the early stick shifts were solid, I think the hydraulic lifters from the 235 will work in the V12. I could be wrong. Bob

[atomman]

The 351 and 702 engines I have taken apart, both had hydraulic lifters.
Atomman

[TJ's GMC]

The 351 and 702 engines I have taken apart, both had hydraulic lifters.
Atomman

What years? Is it the same 351 I got the manifold off of?

[atomman]

Yes, the engine was a 351M that the intake came from, and I had a 351C with hydraulic lifters.

[TJ's GMC]

Course when I modded the manifold I ground down the date stamp :banghead:, but I think it was a 68 or something. Crap!

[bigblockv6]

The 351 and 702 engines I have taken apart, both had hydraulic lifters.
Atomman

What did that 351 come out of? Hydraulic lifters usually came on HC series V6 engines ranging from 305, 351, 401 & 478. Of course 702 V12 all came standard with hydraulic lifters.