Leaking PS Control Valve

[62Burb]

I knew when i bought my '63 that the PS leaked; the seller was a "full disclosure" kinda guy. The leak is pretty bad; the reservoir empties pretty quickly. I cleaned off the control valve area with brake fluid and a brush for a good look. Is this better rebuilt or replaced, and how big a job is a rebuild?

Brad

PS in the photo, that is a steady drip, not a constant stream.

[snazzypig]

I doubt that you could find the parts to rebuild it yourself. I have seen the Lares brand rebuilt cylinders on Ebay. Another option would be to convert to the later type power steering using kits available from a number of sources.

[James]

Check out Rock Auto:
https://www.rockauto.com/en/catalog/gmc,1963,suburban,5.0l+305cid+v6,1440776,steering, power+steering+control+valve,7280
They have new and Remanufactured.

[62Burb]

Ordered! And new tubing from Eckler's for good measure.

[GMCv6inND]

They can be rebuilt depending on the condition, of course. I have a 67 and it also emptied my reservoir very quickly but I found the kit and installed the seals fairly easily. That was prob 10 years ago and I’m still driving it today. The other choice is buy the rebuilt valve - that works too. Good luck