Re: New Member 1960 GMC 4x4
Quote:
|
Re: New Member 1960 GMC 4x4
5 Attachment(s)
Thanks all for the info/ support. Ended up getting the old clutch rebuilt. Cost an arm and leg but it is more in keeping her original so I’m ok with it. I did notice my fork has a Chevy emblem on it. I suspect someone was in there before? Or was it common for Gmc/Chevy to use some of the same components? They are basically the same truck but was surprised to find a Chevy embossment.
A heads up for anyone looking for front 4x4 brake lines. Found them from Napa. Shoulder diameter is about about 1/32nd to large to pass through the frame. Plenty of thread length to pack out with a washer or I may have it machined down. Either way it’s more or less bolt on. See pic for part numbers. |
Re: New Member 1960 GMC 4x4
Anyone know what to torque the cab mount bolts to. I’ve read everything from 80-130 ft-lbs. while we are on the topic any ideas of motor and trans mounts?
|
Re: New Member 1960 GMC 4x4
Time lapse motor install / video post test
https://youtu.be/5njS0VNhuT8 |
Re: New Member 1960 GMC 4x4
Quote:
Code:
[youtube}5njS0VNhuT8[/youtube] |
Re: New Member 1960 GMC 4x4
Absolutely Love it. Like the Pictures. Inspires me to work on mine more often Good Luck. Louie
|
Re: New Member 1960 GMC 4x4
5 Attachment(s)
Few updates. Pulled the rear end apart. Axel seals were leaking. Fashioned a scrapper out of an old washer and piece of all-thread to clean out the axel tube. And made an extended straw for the brake cleaner with some electrical heat shrink. Dropped one side to keep everything flowing out the wheel side then dropped the other and repeated the process. Lightly greased the inside of the tube and axels. Replaced the bearings while I was in there even though they seemed to be in decent working condition. Any recommendations of what gear lube to use? Lots of opinions out there.
While waiting for parts I put some dynamat down. Hope it was worth the cost/effort. Dynaliner then rough in floor mats next time I’m in a holding pattern. Had to have the radiator recored $$$. Pulling apart the front axel next for paint. Seals and all should be good. Did them a couple years back. |
Re: New Member 1960 GMC 4x4
5 Attachment(s)
More pics including radiator hoses with part numbers for anyone in the hunt.
|
Re: New Member 1960 GMC 4x4
I love to see the A+ job you seem to be doing. Lucky truck!
|
Re: New Member 1960 GMC 4x4
5 Attachment(s)
Found some pics of when I first got her.
|
All times are GMT +1. The time now is 07:30 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.