6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Interiors, Dash, Lights and Electrical (https://6066gmcclub.com/forumdisplay.php?f=15)
-   -   Heater controller (https://6066gmcclub.com/showthread.php?t=51431)

JeffO September 22nd, 2022 03:04 PM

Heater controller
 
I have 1966 GMC 1000 that I'm replacing the heat control levers. My question is there is a bracket that holds the bottom half of the control tight to the dash and I cannot figure out how it attaches to the dash.It's kindof a Z shaped bracket.

jbgroby September 23rd, 2022 11:36 AM

Re: Heater controller
 
It rests/sits on the lower flange edge and 2 screws are use to pin the top in, it can't come out.

sclor October 2nd, 2022 10:27 PM

Re: Heater controller
 
2 Attachment(s)
JeffO:
Is this the bracket you are looking for? It bolts to the bottom of the heater control and to the bottom of the dash using one of the bolts in the glove box hinge.

Hope this helps.
Regards
Steve
New Orleans


All times are GMT +1. The time now is 11:38 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.