6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   General Discussion (https://6066gmcclub.com/forumdisplay.php?f=8)
-   -   New Member 1960 GMC 4x4 (https://6066gmcclub.com/showthread.php?t=51029)

TRybas January 6th, 2021 02:38 PM

New Member 1960 GMC 4x4
 
10 Attachment(s)
Long time follower, new member. I have a 1960 GMC 4x4 Custom Longbed Fleetside with a 305A. She was in decent shape when I got her (out of Arizona not sure where she lived before that). Being where I am on the east coast (Philadelphia) I was concerned with rust control. One thing led to another and she’s been fully disassembled starting to piece her back together now. Keeping her as original as possible but planning for a daily driver. A few amenities may be added.
T.J.

FetchMeAPepsi January 6th, 2021 04:30 PM

Re: New Member 1960 GMC 4x4
 
Nice start! Two questions, 1. What did you use for rustproofing on the frame and body panels? and 2. What tires are thooooose????

TRybas January 6th, 2021 06:38 PM

Re: New Member 1960 GMC 4x4
 
3 Attachment(s)
Thanks Fetch. Tires are power king extra traction 7.5-16. Paint is a little trickier to answer. Everything was blasted. Anything too large for my cabinet was sent out then taken to a body shop. Smaller parts I used rust-oleum high performance enamel.

Was just reading through your build. Having trouble finding a clutch kit and front motor mounts. Looks like site listed in the “get a brand new clutch” thread is out of stock on the 04528. I found an 11” that looks like it will bolt up but yet to try it. Throughout bearing is much smaller.

TRybas January 6th, 2021 06:53 PM

Re: New Member 1960 GMC 4x4
 
Aaaand never mind. Won’t work. Protrusions on the flywheel side as described in the thread.

FetchMeAPepsi January 7th, 2021 03:48 PM

Re: New Member 1960 GMC 4x4
 
I know for a fact that the rhinopack will work. I'm using it now. If you can't find one of those, you can get your clutch resurfaced at a clutch shop for about 30 bucks. They're in most all major cities.

Ed Snyder January 8th, 2021 02:04 AM

Re: New Member 1960 GMC 4x4
 
1 Attachment(s)
Quote:

Originally Posted by TRybas (Post 73587)
Tires are power king extra traction 7.5-16. Paint is a little trickier to answer. Everything was blasted. Anything too large for my cabinet was sent out then taken to a body shop. Smaller parts I used rust-oleum high performance enamel.

That's the same size tire I had on my '65 half ton 4x4 which is long gone now. Looks like you've got hundreds of hours in your restoration project already. We'll be looking forward to more progress photos as it goes back together.

Here's a photo of the '65:

TRybas January 18th, 2021 12:30 AM

Re: New Member 1960 GMC 4x4
 
3 Attachment(s)
Motor and cab today. Got a decent time lapse of the motor install but can figure a good way to post it.

FetchMeAPepsi January 18th, 2021 04:33 AM

Re: New Member 1960 GMC 4x4
 
If it's a video, post it on youtubers and then you can post it here by (if i remember right) using youtube tags with the video's number in between. like, (youtube)videocode(/youtube) but with brackets insstead of parenthesis.

snazzypig January 18th, 2021 06:21 PM

Re: New Member 1960 GMC 4x4
 
You're doing a great job there TRybas!

LEWISMATKIN January 19th, 2021 12:48 AM

Re: New Member 1960 GMC 4x4
 
Trybas welcome to the group!!!!!!!!you're doing a great job, keep us in the loop with progress picts!!!


All times are GMT +1. The time now is 10:13 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.