Tite-Reach Wrench Thingy
 

I posted about these new Tite-Reach wrenches the other day on my personal Facespace page, today I found a set in my mail box to test out and do a review on. Of course the cat wants to help out with the review.

Re: Tite-Reach Wrench Thingy
 

Will look forward to your review. Bob

Re: Tite-Reach Wrench Thingy
 

Also wanna hear about the reviews.

Re: Tite-Reach Wrench Thingy
 

As would I like to hear the review.

Sent from my HTC One using Tapatalk

Re: Tite-Reach Wrench Thingy
 

First off, I know this is a turn off for many, they are made in the People's Republic of China. two of the packages state made in P.R.C., the other made in China. So if you don't like stuff from China stop reading now.

I got two versions of these tools, a 3/8' drive DIY and a 1/4" & 3/8" drive PRO

The DIY 3/8" version if made of Plastic rated for 35 ft lbs.
The PRO 3/8" version is made of steel rated for 400 ft lbs.
The PRO 1/4" version is made of steel rated for 35 Mn

As you can see in the photo below the DIY is smaller too, its about 9.5" long were the PRO is 12"

So far this is what I got from unboxing them for inspection and info off the packages.

Re: Tite-Reach Wrench Thingy
 

Have not used them yet, played around with them, then I just had to see what the inside looked like. these are the PRO model, the DIY one being plastic is glued together so I did't take it a part.