| George Bongert |
February 5th, 2023 08:42 AM |
Re: 305E crankshaft torque order
Quote:
Originally Posted by BinfordTools
(Post 76681)
I couldn’t find it in the service manual so I was hoping someone knew the order in which to tighten the main bolts when securing the crankshaft. Thanks
|
Greetings, Binford!
The same as with torquing cylinder heads, start with the center main first, and work your way to the ends of the crankshaft. I would torque a five main bearing crankshaft's bearings as follows; 5-3-1-2-4. Number 1 would be the center main bearing, followed by number 2, and so on. Hope this helps! |
