![]() |
Yikes!!! 305E V6 knocking like crazy!
And the funny thing is that it started happening right after I put a new set of plugs in! Here's a video...what ya'all think? https://www.youtube.com/watch?v=HyhgUvL-2wU
|
Re: Yikes!!! 305E V6 knocking like crazy!
If you swear on a GMC manual that you did nothing else !, then play with timing. If no cure, recheck that the plugs are the same and put old plugs back in to see a difference in sound. Obviously it is something you did and not an all of a sudden, coincidence. So backtrack and think. Hotter plug? Colder plug? wrong length plugs? moved timing? .... loosened manifold or crossover pipe?, high octane gas. Watch the temp gauge so as not to damage motor during trouble shooting. Need to replace items, tighten manifold bolts and re-time to get any kind of a change, this will lead to the remedy. Do one thing at a time and test or you will get confused/misled.
Be aware that a leaky exhaust manifold can make big knock sound. Did you check the heat riser flapper for noise? Bottom line: Get a broom stick and hold it all around motor while up to your ear to isolate the noise if you can. Rich guys use stethoscopes :thumbsup: |
Re: Yikes!!! 305E V6 knocking like crazy!
Quote:
|
Re: Yikes!!! 305E V6 knocking like crazy!
Changed oil and forget to put new in? :ahhhh: Just kidding. Check plug cross reference online till you find three sources that all agree. FLAPS men can be very unreliable.
FLAPS= Friendly Local Auto Parts Store. You are on the right track, don't take anything for granted. Could be detonation or pre-ignition for sure if you say no exhaust leak. If you have the old plugs, put them in for sure, that's a quick check. Did you compare the old to new plugs as far as physically? |
Re: Yikes!!! 305E V6 knocking like crazy!
Yep I put new oil in. lol 6 quarts. I'll have to double check tomorrow. ;) I'll be darned if I put the old plugs back in and it runs fine! Guess that'll mean another run back to Napa for Autolight plugs if that's the case.
|
Re: Yikes!!! 305E V6 knocking like crazy!
Good job. Great result. "Plug" on.
|
Re: Yikes!!! 305E V6 knocking like crazy!
Well I have no idea what I did but the engine decided to quit knocking all by itself. LITERALLY. I pull all the new plugs and put the old ones back in...still knocks...pull both valve covers to make sure everything is moving and nothing is bent. Has a little more sludge in there than I'd like to see.....Ran it till she got hot and pulled the radiator cap to see if I had a blown head gasket...no bubbles....now it only knocks on deacceleration.....so you rev it and while it comes back down to idle it knocks just a little now....with the old or new plugs. So the plugs aren't the issue. The knocking from deacceleration sounds like a very loose rocker arm but its not. Hard to explain what it sounds like and the camera doesn't help either. I'm starting to think one of the lifters is hanging up a little. Thoughts? Knocks when the engine comes back down to idle..sometimes.
|
Re: Yikes!!! 305E V6 knocking like crazy!
:postgood:Good information to help anybody who is doing basic troubleshooting. Thanks:thumbsup:
Foley Greenwood, Ca |
Re: Yikes!!! 305E V6 knocking like crazy!
Quote:
|
Re: Yikes!!! 305E V6 knocking like crazy!
Quote:
I had a knock, it wasn't bad so I ignored it. At 55 mph the knock stopped, so did the truck. I had dropped a rod cap, the knocking was the piston slapping the head (had a nice imprint of the valves on it). BIG mistake to ignore any noise, or "get used to it" as I did. |
All times are GMT +1. The time now is 07:15 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.