6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Builds and Journals (https://6066gmcclub.com/forumdisplay.php?f=16)
-   -   A 1962 GMC 1000 Series Utility with Extra Goodies (https://6066gmcclub.com/showthread.php?t=51169)

Funky61 July 13th, 2021 12:15 AM

A 1962 GMC 1000 Series Utility with Extra Goodies
 
Hello Everyone, Posting up a new project I acquired. It is a 1962 GMC 1000 series with the Utility cabinets in place of the GMC Fenderside fenders.
It has the 305D V6 and the SM420 with the Dana 44 (ratio TBD-3:92?) and suspension is Torsion up front and coils in the rear. It came with 16” 3-clip wheels and it even has Dual Horns. Its unladen weight is listed as 3400lbs.
Truck was built at the Pontiac Plant and title transfer documentation shows it came from Minneapolis and ended up in Arizona in 1968 and there it remained until it came to me.
I had not seen many SWB utility trucks. Most commonly found are of the C20 variety and those have the beds removed and replaced with utility boxes. I don’t know if I’d call it rare, but definitely unique and different.


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Raspberry Sherbet-
So this truck apparently has three colors; my guesses are Flame Red under Omaha Orange under a Crystal Green (I got those names from a GMC Paint page)
Maybe it started life as a Fire Utility and came to Arizona where it morphed into a Telephone company truck. The last owner worked for the Local telephone company called CONTEL and I was told that he bought the truck when he retired from there. Company sticker shadow on tailgate says Grand Junction and?


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?






To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



The truck was later used for camping and that’s where the camper top came into play along with the Crystal Green Paint. It had a CB unit rack mount inside, but looks like the window was busted out to steal it. I really like the camper top on it, as I feel it gives an eclectic look.


Mounted on the back of the cab are one of those long transmitting antennae and some Heath Kit speaker/monitors inside the cab and one in the bed. Bedwood is in pretty good shape and it also came with non-commercial plates.

In the engine bay was an old school 60’s MilesMaster Fuel regulator and a Heath CDI Ignition and an old Warner Electric Brake under the steering column.


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Mileage shown was 02201 which I took to be 102,201 as the truck was fairly clean but lots of Arizona dust everywhere. Interior was okay and needed a good cleaning. Floor mat was the original but old and had to be thrown out.


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Some Goodies found!
So here are some photos of what was in the cab, bed and utility Boxes.
They include; some mirrors and tire lug wrenches, snow chains, antennae, Olivetti calculator, Test Lead rack, CB mount rack, spare inner tube and an art deco style Clamshell ashtray and one Blue Chip Stamp


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





What’s in the Box?
The truck also came with two huge cabinets in the bed. All I was told was that, it might be telephone equipment. Here is what I got:


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I found a couple of …ahem, Men’s Magazines inside one of them that dated 1978.
One cabinet was full of electronics and the other looked like some kind of Nuclear James Bond type device with four gold canisters that Goldfinger created LOL
My research came up empty so I reached out the Telephonic Connections Museum in Seattle and they had an answer for me thankfully. Here is info on that Museum in Seattle.
The museum features working Panel and Crossbar electromechanical central-office switches. The Connections Museum also has working Step-by-Step and Crossbar PBX equipment as well as antique telephones,*switchboards,*outside plant displays, including poles, cables, splicing equipment, tools, and other related*communications equipment*and machines. The Connections Museum also features a cataloged telecommunications reference library, useful for researchers.
Connections Museum Seattle | HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Telecommunications History Group, HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Here is a clue photo:


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



My plans are to get it back to running status and keep it pretty much the way it is.
I am still on the hunt for those elusive hubcaps
Thanks for reading, Henry

Ed Snyder July 13th, 2021 02:08 AM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
Quote:

Originally Posted by Funky61 (Post 74324)
Hello Everyone, Posting up a new project I acquired. It is a 1962 GMC 1000 series with the Utility cabinets in place of the GMC Fenderside fenders.

My plans are to get it back to running status and keep it pretty much the way it is.
I am still on the hunt for those elusive hubcaps
Thanks for reading, Henry

Awesome story and photos, HenryJ! I like the patina pattern in the paint. Now you're going to have to add 1962 Utility to your ID in the upper right corner. Keep us posted on your progress with your new find.

Funky61 July 13th, 2021 03:55 AM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
Thank you Ed; yes it does have that weathered look of experience.

I’ll have to make that add to my ID you suggested :bump5:

Funky61 July 18th, 2021 05:00 AM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
I got the engine started earlier today using the CDI unit still attached. It just fired right up and that Stromberg idles pretty smooth. :upyes:

Maybe tomorrow I will push that Red button on the CDI Unit and see if it will work in the conventional points mode.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


63gmc4x4 July 26th, 2021 07:08 PM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
nice truck! i own a 62 swb utility bed as well

Funky61 July 26th, 2021 07:50 PM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
Thank you 63GMC4x4!

Would you mind sharing a few of yours? Where was it built?


Oh I remember now; it’s the green one with plaid valve covers!

ZDADDY August 3rd, 2021 04:02 AM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
Quote:

Originally Posted by Funky61 (Post 74324)
Hello Everyone, Posting up a new project I acquired. It is a 1962 GMC 1000 series with the Utility cabinets in place of the GMC Fenderside fenders.

It has the 305D V6 and the SM420 with the Dana 44 (ratio TBD-3:92?) and suspension is Torsion up front and coils in the rear. It came with 16” 3-clip wheels and it even has Dual Horns. Its unladen weight is listed as 3400lbs.

Truck was built at the Pontiac Plant and title transfer documentation shows it came from Minneapolis and ended up in Arizona in 1968 and there it remained until it came to me.

I had not seen many SWB utility trucks. Most commonly found are of the C20 variety and those have the beds removed and replaced with utility boxes. I don’t know if I’d call it rare, but definitely unique and different.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Raspberry Sherbet-

So this truck apparently has three colors; my guesses are Flame Red under Omaha Orange under a Crystal Green (I got those names from a GMC Paint page)

Maybe it started life as a Fire Utility and came to Arizona where it morphed into a Telephone company truck. The last owner worked for the Local telephone company called CONTEL and I was told that he bought the truck when he retired from there. Company sticker shadow on tailgate says Grand Junction and?



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?









To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





The truck was later used for camping and that’s where the camper top came into play along with the Crystal Green Paint. It had a CB unit rack mount inside, but looks like the window was busted out to steal it. I really like the camper top on it, as I feel it gives an eclectic look.





Mounted on the back of the cab are one of those long transmitting antennae and some Heath Kit speaker/monitors inside the cab and one in the bed. Bedwood is in pretty good shape and it also came with non-commercial plates.



In the engine bay was an old school 60’s MilesMaster Fuel regulator and a Heath CDI Ignition and an old Warner Electric Brake under the steering column.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





Mileage shown was 02201 which I took to be 102,201 as the truck was fairly clean but lots of Arizona dust everywhere. Interior was okay and needed a good cleaning. Floor mat was the original but old and had to be thrown out.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





Some Goodies found!

So here are some photos of what was in the cab, bed and utility Boxes.

They include; some mirrors and tire lug wrenches, snow chains, antennae, Olivetti calculator, Test Lead rack, CB mount rack, spare inner tube and an art deco style Clamshell ashtray and one Blue Chip Stamp



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?









What’s in the Box?

The truck also came with two huge cabinets in the bed. All I was told was that, it might be telephone equipment. Here is what I got:



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





I found a couple of …ahem, Men’s Magazines inside one of them that dated 1978.

One cabinet was full of electronics and the other looked like some kind of Nuclear James Bond type device with four gold canisters that Goldfinger created LOL

My research came up empty so I reached out the Telephonic Connections Museum in Seattle and they had an answer for me thankfully. Here is info on that Museum in Seattle.

The museum features working Panel and Crossbar electromechanical central-office switches. The Connections Museum also has working Step-by-Step and Crossbar PBX equipment as well as antique telephones,*switchboards,*outside plant displays, including poles, cables, splicing equipment, tools, and other related*communications equipment*and machines. The Connections Museum also features a cataloged telecommunications reference library, useful for researchers.

Connections Museum Seattle | HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Telecommunications History Group, HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

HYPERLINK "https://

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Here is a clue photo:



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





My plans are to get it back to running status and keep it pretty much the way it is.

I am still on the hunt for those elusive hubcaps

Thanks for reading, Henry

Funny.......I found a dirty mag from the 80's in my 60 gmc as well:-)

Sent from my P027 using Tapatalk

Funky61 August 9th, 2021 09:29 PM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
I am still just fleshing out the condition of the engine. I did a flush of the coolant and used a product called Blue Devil radiator Flush. I don’t think I needed it, because everything that came out after 4 flush cycles seemed pretty clean. I did put a new water pump in as well, so maybe that was the issue that was the culprit.

* Correction, I did need it because I got dirty blackish sooty water coming out

The engine will start with the CDI Button pushed IN, or button OUT for Conventional meaning points.

I temporarily added a mechanical water temperature gauge and oil pressure gauge. It was about 90 degrees out and I let the truck idle for about 30 minutes and these were the numbers I received. Those were with just water in the radiator.


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



I also changed out the canister oil filter to the Spin On factory unit.


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Overall I am pretty happy with the numbers I received. Oil Pressure started out at 50lbs with the choke on and dropped to just under 40lbs with choke off after two minutes; then to just under 30lbs after 30 minutes of idle and water temperature showing a steady 175 degrees thereabouts.

They truck is "drivable"; That is, I moved it a few feet using 1st gear and 2nd (SM420), E- Brake works and pedal holds, but not ready to road test yet. I need to work on the brakes shoes, cylinders and hoses and then some tires.

Also I have been polishing up that aluminum topper little by little and it is shining up pretty well after so many years. I used Mags Aluminum Polish


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Jethro August 16th, 2021 01:30 AM

Re: A 1962 GMC 1000 Series Utility with Extra Goodies
 
Unique, eclectic, and kewl.


All times are GMT +1. The time now is 03:43 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.