Re: Jethro's 1964 I1000
 

It was at this point that I figgered out the O.E. adjusters are riveted in as are the springs. In order to remove the headlight backing plates the whole grill has to come out.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Here's the best pic I have of the grill. Since it was out I took the opportunity to do a little bit of hammer and dolly work. Looks quite a bit better now. And the bezels go in and out much easier.

During reassembly be really careful while you're stretching those springs back on with a greasy old seal pick.
Probably not the correct tool...



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Not sure if you can tell the difference in the grille. Bolted on a chrome plate holder too.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



And a dome light lens to replace the missing one.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?