6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Wheels, Tires, Suspension and Brakes (https://6066gmcclub.com/forumdisplay.php?f=23)
-   -   Leaking PS Control Valve (https://6066gmcclub.com/showthread.php?t=50459)

62Burb October 14th, 2018 12:34 AM

Leaking PS Control Valve
 
1 Attachment(s)
I knew when i bought my '63 that the PS leaked; the seller was a "full disclosure" kinda guy. The leak is pretty bad; the reservoir empties pretty quickly. I cleaned off the control valve area with brake fluid and a brush for a good look. Is this better rebuilt or replaced, and how big a job is a rebuild?

Brad

PS in the photo, that is a steady drip, not a constant stream.

snazzypig October 14th, 2018 04:18 AM

Re: Leaking PS Control Valve
 
I doubt that you could find the parts to rebuild it yourself. I have seen the Lares brand rebuilt cylinders on Ebay. Another option would be to convert to the later type power steering using kits available from a number of sources.

James October 14th, 2018 12:34 PM

Re: Leaking PS Control Valve
 
Check out Rock Auto:
https://www.rockauto.com/en/catalog/...rol+valve,7280
They have new and Remanufactured.

62Burb October 14th, 2018 01:18 PM

Re: Leaking PS Control Valve
 
Ordered! And new tubing from Eckler's for good measure.

GMCv6inND February 7th, 2019 01:55 AM

Re: Leaking PS Control Valve
 
They can be rebuilt depending on the condition, of course. I have a 67 and it also emptied my reservoir very quickly but I found the kit and installed the seals fairly easily. That was prob 10 years ago and I’m still driving it today. The other choice is buy the rebuilt valve - that works too. Good luck


All times are GMT +1. The time now is 10:08 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.