Diameter of the 305 flywheel
 

Do any club members have the measurement of the 305 flywheel? If so can you post it. I need outside edge to outside edge.

Thanks
Jake

Re: Diameter of the 305 flywheel
 

JAKE, the o/d of the manual flywheel gear 2369440 (napa 6003026) is 16.00"/191t. I hope this helps.

Re: Diameter of the 305 flywheel
 

I was just checking to make sure because the flywheel for the new automatic trans. adaptor is 16" as well. I suspected as much because if not, the starter gear would not have made contact. Never hurts to check.

Re: Diameter of the 305 flywheel
 

Jake, I'd replace that starter ring gear while the parts are still uninstalled. Never hurts to put in a new wear part when the opportunity arises.

Re: Diameter of the 305 flywheel
 

Also he ring gear can be taken off and flopped over to the other side.

Re: Diameter of the 305 flywheel
 

Thanks, I'll do the ring gear change.