6066 (1960-1966) GMC Truck Club - The Big Red Machine

Page 2 of 2

Show 40 post(s) from this thread on one page

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)

- Builds and Journals (https://6066gmcclub.com/forumdisplay.php?f=16)

- - The Big Red Machine (https://6066gmcclub.com/showthread.php?t=50461)

3/4ton Randy

January 31st, 2019 12:54 AM

Re: The Big Red Machine

2 Attachment(s)

Thanks to help from Jeanie and WE7x I was able to get a copy of the drawing to perform the Ehrlbacher mod. It's used to locate the hole in your distributor gear so you can use a roll pin. I took the gear to a shop that had EDM services (electrical discharge machining) and they performed the work. Dizzy can now be installed!

3/4ton Randy

January 31st, 2019 01:05 AM

Re: The Big Red Machine

Sorry for the poor picture quality! It just shows the roll pin installed.

3/4ton Randy

January 31st, 2019 06:59 PM

Re: The Big Red Machine

2 Attachment(s)

I do a good bit of highway driving, so the SM420 trans needs to go. I looked around and found a 6 spd Tremec conversion. This should work great with 305 V6! The Tremec is a lot longer.

Ed Snyder

February 1st, 2019 01:27 AM

Re: The Big Red Machine

Quote:

Originally Posted by 3/4ton Randy (Post 70543)

I do a good bit of highway driving, so the SM420 trans needs to go. I looked around and found a 6 spd Tremec conversion. This should work great with 305 V6! The Tremec is a lot longer.

Keep us updated with photos and details of your 6 speed conversion!

TJ's GMC

February 6th, 2019 05:42 AM

Re: The Big Red Machine

Subbed

All times are GMT +1. The time now is 08:02 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page