351 Head Gaskets On Ebay
 

If anyone is looking for these:

https://www.ebay.com/itm/Rare-Dual-L...ty!90066!US!-1

No connection to seller.

Re: 351 Head Gaskets On Ebay
 

Sure wish I’d seen this earlier, but I managed to get the last one. One is better than none?! Thanks for the heads up though....

Re: 351 Head Gaskets On Ebay
 

Recvd this gasket and wish I’d checked the number out further before I jumped on the purchase. Measured the new gasket and layer it on my 351 cal head - it’s a little larger than the old one. Then looked up the victor #3379 on the new gasket and it tracks to a 401. With it laying on the head, it looks as though it could work?! But a little closer to some water ports?!
Any advice on whether this will work?

Re: 351 Head Gaskets On Ebay
 

You might want to return it for a refund. Ebay will refund your money for almost any conceivable reason, and your's is legitimate (item not as described). Good for the buyer but not for a small time seller when people want to return an item months later after using and abusing it.

351 head gaskets still pop up on Ebay from time to time.

Re: 351 Head Gaskets On Ebay
 

It should be O.K., the Fel-Pro HS-7962-SB-3 head gasket set was listed for the 351 in their catalog, but really was for the 401 and 432. As long as the coolant and oil passages all line up, I don't think it matters if the head gasket fire ring is recessed back a bit from the cylinder wall. I think I have 401 head gaskets on my 351.

Re: 351 Head Gaskets On Ebay
 

Yeah, I’m thinking (hoping) you’re correct that it’ll work for both engines, all the holes and ports line up. I contacted the seller and he said same thing, that it’s listed as fitting both 351 and 401. While looking up info on this, I found another company selling head gaskets for the v6s - including the 351 and 702. So, I ordered a set of those as well and will measure the fire ring on them when they arrive. I’ll make sure to get back on here and let you know what I find out.
Thanks all for the help

Re: 351 Head Gaskets On Ebay
 

Yes, please do. The last listed Fel-Pro head gasket for the 351 was 7962 SB-2, which was also used for the 401 and 432. I am pretty well sure that is the gasket I used when I rebuilt my 351.

Re: 351 Head Gaskets On Ebay
 

same gaskets , i ordered the same ones on ebay and compaired them to my og 351 and my felpro set there the same

Re: 351 Head Gaskets On Ebay
 

Somewhere years ago I saw a listing for 401 gaskets that were compatible for the 351, yet there was an actual 351 gasket from GMC that was different, I actually have just one gasket like that. I posted the comparison some time last year.

Re: 351 Head Gaskets On Ebay
 

I found what you had posted. Not a lot of differences. Only the cylinder bore opening is different.
https://6066gmcclub.com/showpost.php...1&postcount=27
:upyes: