6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Transmissions and Rear Ends (https://6066gmcclub.com/forumdisplay.php?f=10)
-   -   1963 SM420/305E Pilot bushing or Bearing? (https://6066gmcclub.com/showthread.php?t=48444)

AZKen October 26th, 2014 05:13 AM

1963 SM420/305E Pilot bushing or Bearing?
 
Is this setup supposed to have a pilot bearing? or a bushing?, found bearing on the floor after disassemble. Not sure how long it had been there. What is the Part number for bushing or bearing? Thanks.

bigblockv6 October 26th, 2014 06:49 AM

Re: 1963 SM420/305E Pilot bushing or Bearing?
 
It takes a bearing, If I can dig up an old one I have I'll see if it's got a part number. Funny I bought one back in 2001 at Pep Boys that was hanging on a rack, just looked at it by chance and was surprised it was listed for the GMC V6.

AZKen October 26th, 2014 08:39 AM

Re: 1963 SM420/305E Pilot bushing or Bearing?
 
Thanks, I may have found it to be 7109. I forgot to check Jolly's known numbers and low and behold he has it and so does O'Reilly's listed for a 66 Olds 330 V8? Came into it sideways. I am going to check the given sizes against the one I found on the floor: ID, OD thkness. Will advise. Thank you for the reply.

AZKen October 26th, 2014 07:39 PM

Re: 1963 SM420/305E Pilot bushing or Bearing?
 
The bearing I have measures exactly the same as 7109. I will try to remember to check Jolly's known numbers next time. thanks BBV6.

bigblockv6 October 27th, 2014 03:34 AM

Re: 1963 SM420/305E Pilot bushing or Bearing?
 
Ken, that's got to be the one, I dug the old bearing I have and it's a 7109 as well.

Andice October 27th, 2014 10:12 PM

Re: 1963 SM420/305E Pilot bushing or Bearing?
 
Just checked my receipts and 7109 is the correct number for the pilot bearing.

AZKen October 27th, 2014 10:53 PM

Re: 1963 SM420/305E Pilot bushing or Bearing?
 
Thanks Guys


All times are GMT +1. The time now is 03:25 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.