3/4t GMC with 16" rims
 

Hello everybody,

maybe you can help me. Truck restoration is finished but I have problems licensing my 3/4 ton truck with 8 hole lug in Germany as a vintage truck.

The technical officer from the German TÜV says that the 16x6.5 inch rims are not original. Original would be 17.5 inches.

But if I can prove to him that 16-inch rims with 8 holes were also installed at the time (1960-66) on a 3/4ton truck, he will grant me vintage car status. Does anyone have any information or maybe even a sales brochure where 16 inches where mounted? I only found the list from 1960HDGMC where 17.5 inches as stock wheels are listed. Everything helps. The more paperwork the better here with us in our country :D

https://6066gmcclub.com/showthread.php?t=48503

https://up.picr.de/45856694yt.jpg

https://up.picr.de/45856696qa.jpg


Many greetings

Re: 3/4t GMC with 16" rims
 

http://www.67-72chevytrucks.com/vboa...factory+wheels

Check out Post# 9 and Post #11


and some info that may be useful

https://i.postimg.cc/Dz55Y8s9/1965-Equipment-pg087.jpg

https://i.postimg.cc/4NZPZ65D/1965-Equipment-pg092.jpg

Re: 3/4t GMC with 16" rims
 

Thank you very much Funky61 :signthankspin:

Maybe this will help me. I will report you when I have my plate for driving on the road

Re: 3/4t GMC with 16" rims
 

Here is reference from a 1962 maintenance manual (see attachment). This manual is also a supplement for 1963 & 1964. Hope this help.