Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)
Grab your wrench looking piece of linkage and hook the wrench portion on the bottom of the carb.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then hook the little spring on the back up and run the screw through it. Don't tighten it.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Here's a side view so you can see. You need to make sure the wrench shaped linkage is hanging on the screw you just ran in, not butted up to the carb. THEN start screwing it down. It should move freely once you get it screwed down.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Put the link that looks like an "S" through the bottom part
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then the top.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
And cotter key them both.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Now find a gasket to fit the bottom of "the bottom plate". This one obviously belongs in an art bucket at a pre-school. It doesn't fit. I have to say that for legal reasons so you don't try to use it and cause a thermo-nuclear reaction in your intake manifold.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
|