Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)
My compressor works great now, but it didn't before. All four legs were broken off the motor. So I called around to get some info and maybe buy a motor casing from the manufacturer. They said no way. I called a repair shop. They said Nope.
I called another repair shop. They said they'd check to see if they had a busted motor in. They did. It didn't have motor mounts
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
So I fixed it myself the only way I know how - Cheap!
I first decided I wanted something to dampen the noise. I needed something both flexible and heat resistant so I chose one of those blue cheap silicone baking mats. Folded in half it fit perfectly.
Here's the Powder Puff mechanic sliding it under while I lift the motor:
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then I tied it down by running two bits of a coathanger through the outside screw holes and over the motor.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then it was time to put some compressor oil in it. I chose Porter Cable brand.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Finally I plugged 'er in and plugged all the leaks, put plumbers tape on the fittings, and she ran great. She holds air! Now time to spend a small fortune on air gadgets.....
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Last edited by FetchMeAPepsi; April 27th, 2013 at 02:40 AM.
|