Quote:
What the heck? Now I see why these tanks were $10.00. They did cost me $60 to fill though so I was pretty angry about that.
|
Interesting. About $10 a piece is what I pay for full tanks of that size. I have a set, in their own little carrying package. Cutting with them though, you will go through the Acetylene -very- quickly.
Quote:
I'm stick welding with it because that's what I practiced on so I could somehow try to find a cheap cracker-box welder from a farmer or something soon. If you guys know of one around $100 (ac) please let me know
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
|
Harbor Freight. I bought an 80 Amp stick welder from them (never used wire feed so I didn't get that one). It is also a 110 (or 120) volt unit I can plug into a "normal" outlet. Bearing in mind -all- my outlets are 20 Amp (house was seriously overbuilt) and can handle a lot. I think it draws only 15 amps when running, which would max out a normal home circuit. Even at 80 amps I was blowing holes in my work, had to drop it to 60 to do the welds on my trailer.
I *think* normal retail is somewhere around $100, but I never buy anything unless it is on sale (I am a cheap son of a gun). Also picked up an auto darkening welding helmet for around $35 from them as well. Saves your eyes (and you thought they Oxy/Acet was bright!) plus allows you to see what you are doing without taking the helmet off since it goes clear when the arc isn't struck. Probably senses the UV from the arc...