Re: My woodsplitter project
My last two fittings came in today.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
I put them on with more teflon tape. And I found out one of the fittings NAPA put on was bigger than the others so I had to add more tape, but just a bit.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then I started pouring my 5 gallon bucket of cheap-o hydraulic fluid from Tractor Supply into the tank. Even the cheap stuff is like 35.00 for 5 gallons. Ouch!
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then I closed up the tank and poured fluid in through a funnel. Finally i gassed her up, started the motor and gave it a second to pump some oil in.
Then I tried the switch and Sqqqquirrrtt!!! One of my hose connections had a blowout.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
So I re-taped it and tightened it up. Then I tried it again and the motor spun down like it was really tryin, but the cylinder didn't move. I thought Hmm, maybe I hooked it up backwards. So I opened the hoses from the cylinder. One was bone dry.
The other one was pressurized all up and leaked as I took it apart. I moved it over the tank so I wouldn't lose this expensive oil.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then the stupid thing popped loose out of the blue.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
I wasn't too happy, but with a little batter and onion I guess I was ready for the fryer.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
The hose that had oil went to the top of the cylinder so i figured it was on the wrong place. I swapped it.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
And still no movement from the cylinder. IDK what's wrong now. Maybe the cylinder is frozen? It is used so I guess I'll work on figuring out how to test it.
__________________
Step by steps:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
|