Re: My woodsplitter project
Quote:
Dac, you were right on. The hose that blew off is one that NAPA put together for me and instead of doing 1/2 inch they did 5/8 inch. so I had to get this:
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
I taped it up and put it on the new hose:
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then I fired it up and pressed the plunger. The hoses held great! Then the motor died. The cylinder didn't move a bit. I started the motor up again and slowly pressed the lever so it put gentle pressure on the cyl from the inside then I banged the crap out of it with a sledge hammer. I worked my way up to "hard as you can hit" power. It moved 1/8 inch. I think it might be frozen.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
|
Glad you got the fitting situation sorted out. Is that a rebuildable cylinder? maybe it could be taken apart and freed up?
DAC
__________________
Doug Crawford
Rapid City, SD
1970 GMC K5 Jimmy Mom drove 30 years
1972 GMC C2500 owned since 1979
1955 GMC 100 driver-project
2006 GMC Yukon Denali---wife's truck
Hope to have a '60 GMC Suburban again someday
|