[JPBrecheisen]

Fetch,

Thanks for the pic posting, but what we need to see is inside the hub. What is holding it on is inside the "cavity" of the wheel hub.

BarryGMC is right on the money. You'll need to get the "locking hub mechanism" out of the wheel hub before you'll have access to the spindle nuts.

Take a second look at the pictures I put the arrow on. I'm not familiar with the style locking hubs you have, but you might possibly need to also remove the snap ring that's on the axle shaft itself.

Take a look inside the hub cavity and see if you can spot another snap ring. It will be about the diameter of 50 cent piece. Wipe the grease out of it and see if you can't see one near the center where the axle shaft is sticking through.

Jonathon