Quote:
|
Fetch,
What kind of locking hubs do you have?
There should be brand name and model number on them somewhere.
There is a lot of NOS (New Old Stock) items available out there. I'd be almost willing to bet you could find a rebuild kit for those (should include O-rings) somewhere.
I have WARN M-8 style hubs. I was able to find what I needed from left over rebuild kits that were out there.
Your hubs look different, but I think they may still make that kind if its the type I think it is.
That would be my advice. Send me the info, I'll poke around a little for you also.
Jonathon
|
Thanks! My hubs are Power Train Tools. They're rebranded Selectros.
I found that last ring too.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
This is the smaller one that goes on the OUTER side of the hub. It's this one:
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Part number 033-7290
Description:
Code:
033 Viton O-Ring, 90A Durometer, Round, Black, 2" ID, 2-1/8" OD,
1/16" Width (Pack of 10)
I also found a similar looking brass bushing from off of a 60's Willys Jeep but it was about 1/8" too small in diameter. If someone has a Willys I have a free bushing
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
I'm still looking for a reliable replacement for those.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?